Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mercedes-BenzMercedes-Benz S-Klasse

1972– · 7 generationen · 54 dokumentierte Mängel · 7 Märkte
Generationen

Alles zum Mercedes-Benz S-Klasse, alle Generationen zusammen: Mängel, Rückrufe, Servicemitteilungen und Diskussionen. Wählen Sie eine Generation, um einzugrenzen.

Schwerwiegendste Mängel

Alle ansehen (54) →
m

Electrical system: problems reported by owners

273 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1999–2005), typically at around 93,000 miles. Most often named: instrument cluster/panel (30%). Reported consequences: 1 crash, 11 fires, 3 injuries.

✓ Mecafile-Auswertung amtlicher Daten1999–2005Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
KritischInnenraumNAS-Klasse W220 · 1998–2005

Airbags: problems reported by owners

30 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1999–2005), typically at around 90,000 miles. Most often named: frontal (17%). Reported consequences: 6 crashes, 1 fire, 10 injuries.

✓ Mecafile-Auswertung amtlicher Daten1999–2005Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste Rückrufe

Alle ansehen (531) →
S-Klasse W222 · 2013–2020S-Klasse VII (W223) · 2020–
RückrufMittelBremsenEU

Les tuyaux de frein de l'essieu avant peuvent présenter une fuite, ce qui provoque l'échappement du…

Les tuyaux de frein de l'essieu avant peuvent présenter une fuite, ce qui provoque l'échappement du liquide de frein. cela pourrait réduire les performances de freinage et, si le fluide se déverse sur la route, réduire l'adhérence des véhicules suivants, augmentant ainsi le risque d'accident.

Safety Gate · EU · RappelConso · Frankreich13. Nov. 2026sr/03179/26Modelljahre 2019–2024Im Original (Französisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S-Klasse VII (W223) · 2020–
S-Klasse VII (W223) · 2020–

Neueste technische Bulletins

Alle ansehen (889) →
S-Klasse VII (W223) · 2020–
BulletinGeringElektrikNA

Bulletin

Complaint Customer states check engine light ON and potentially reduced power output. The following DTC's may be current and/or stored in the ME control unit (N3/10): P210185 The throttle valve actuator has a malfunction. There is a signal above the permissible limit value. P213500 The values from the position sensors of the throttle valve are implausible relative to each other P213600 The values from position sensors "A/C" of the throttle valve are implausible relative to each other P210B85 The throttle valve actuator 2 has a malfunction. There is a signal above the permissible limit value. P2AD300 The values from the position sensors "A/G" of the throttle valve are implausible relative to each other P2AD200 The values from position sensors "B/G" of the throttle valve are implausible relative to each other. NOTE: The faults may also be present in the ME control unit "faults without status filter" Cause Increased electrical resistance between the pins for left and right throttle actuators (M16/60 and M16/61) and the sockets on the engine wiring harness connector. Remedy Replace the sockets in the engine wiring harness connector at both the left and right throttle actuator with the following parts: Silver Plated Sockets 8x A 003 982 70 26 (according to wiring diagram 0.5 mm) 4x A 003 982 73 26 (according to wiring diagram 0.75 mm) ELA Seals 12x A 001 545 50 80

NHTSA · Herstellerbulletin11039063Modelljahre 2021Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S-Klasse VII (W223) · 2020–
BulletinMittelFahrwerkNA

Bulletin

Complaint Diverse functional limitations in the vehicle in combination with various warning and fault messages in the instrument cluster display. Cause Communication timeouts mean that communication errors may occur in the onboard electrical system, which can result in various fault messages being displayed in the instrument cluster. This could be down to delayed feedback from the drivetrain control unit (N127) (CPC) to other control units networked to the CAN bus. Information: Only valid for vehicles through production period 10/2025. Not valid for vehicles with control unit CDCC (N125, central controller charging and driving) It may not be possible to attribute any communication errors stored in the control units on the CAN bus to a specific cause In rare instances, there may be a brief activation of the yellow warning lamp for engine diagnosis or there may be a sporadic delay with the start enable. There may not be any specific fault codes present that indicate a specific component. Example image: Fault messages in instrument cluster: The reason for this could be down to delayed feedback from the control unit CPC3 to other control units networked on the CAN bus. Remedy Do not replace any components!!! ******************************************************************************************************* 1. Connect charger (see AR54.10P1127WT). Note: An adequate voltage from the onboard electrical system battery must be guaranteed for the entire duration of the work procedure. Otherwise, the control units could be damaged if an undervoltage occurs. Information: Observe the operating instructions of the charger. Information: Use the charger to ensure an adequate voltage (at least 12.5 V) from the onboard electrical system battery. 2. Connect diagnostic system (see AD00.00P200006FR). Note: Always use the latest XENTRY Diagnostics software release. Information: Strict compliance with the operation steps in XENTRY Diagnostics is absolutely essential. 3. Select control unit N127 (CPC) via the direct link using XENTRY Diagnosis. Information: To do so, select the following menu items: Control units view Drive systems N127 "Drivetrain" control unit (CPC) 4. Update software for control unit N127 (CPC) (see AR54.21P001401Y). Info: To do so, select the following menu items: Adaptations Control unit update Update control unit software. Information: You are then automatically guided through the steps "Update of control unit software" and "SCN coding". Always observe the following operation steps at all times 5. Disconnect diagnostic device from vehicle (see AD00.00P200006FR). 6. Disconnect charger from vehicle (see AR54.10P1127WT).

NHTSA · Herstellerbulletin11038925Modelljahre 2021–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S-Klasse VII (W223) · 2020–
BulletinMittelGetriebeNA

Bulletin

Issue On the subject vehicles, the transmission control unit (VGS) in the automatic transmission does not conform to current production specifications. It is possible that the polarities of the magnets in the transmission control unit (VGS) could have been incorrectly installed, leading to potential shift quality issues and gear lockouts. Remedy MBUSA will conduct a service campaign. An authorized Mercedes-Benz dealer will update the software of the electric controller unit "fully integrated transmission control" in the affected vehicles.

NHTSA · Herstellerbulletin11038924Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste Forenthemen

Noch keine Diskussion.

Mängel und Diskussionen werden pro Generation geführt: Wählen Sie oben eine aus, um Ihren Beitrag hinzuzufügen.

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).