Vehicle description: Passenger vehicles equpped with the "california" emissions package. An incorrect transmission oil cooler line was installed. The line contacts the anti-lock braking system module support bracket and over time, can wear and develop a leak.
Vehicles that were serviced for a stall condition between august 1, 1997 and december 1, 1997 may have received and incorrect fuel tank. The incorrect tank contains an additional vent hole which provides the potential for a fuel leak. Correction: Vehicles will be inspected and fuel tank will be replaced with the correct tank if necessary.
Transport Canada4. Juni 19981998114Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Vehicle description: Passenger vehicles previously serviced under ford service bulletin 97-17-9 from august 1997 through december 1997. These vehicles were inadvertenly equipped with an 18-gallon fuel tank rather than the 16-gallon as specified. The 18-gallon tank has a second valve location where a shipping plug should be installed.
NHTSA · USA25. März 199898V067000Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Vehicle description: Passenger vehicles equipped with ax4s automatic transaxles. The low/intermediate servo cover can separate from the transaxle while the vehicle is being driven. If this occurs, transmission fluid will leak contacting the catalytic converter.
NHTSA · USA9. Juni 199797V097000Modelljahre 1997Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain passenger vehicles originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia, the front coil springs could fracture due to corrosion associated with salt used on the roadways during the winter. A fractured spring could move past the spring seat and contact a front tire.
NHTSA · USA15. Juli 200404V332000Modelljahre 1999Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Fahrzeugbeschreibung: Personenkraftwagen. Der Gurtaufroller des Sicherheitsgurts kann einen fehlerhaft ausgeformten Bolzen im umschaltbaren ELR/ALR-Mechanismus aufweisen. Unter bestimmten Umständen könnte der Umschaltmechanismus funktionsunfähig werden, wodurch sich das Gurtband nicht aus dem Aufroller herausziehen lässt. Ebenso ist möglich, dass eine Fehlfunktion des Mechanismus verhindert, dass der Gurt in den ALR-Modus geschaltet werden kann. Der ELR-Mechanismus ist von diesem Zustand nicht betroffen.
The dash insulator retainer may not have been fully engaged. The retainer may disengage, and in some cases it could become lodged above the accelerator pedal pivot. This could prevent the engine from fully returning to idle. Correction: Vehicles will be inspected for proper installation of the dash insulator retainer and re-install if required.
Transport Canada18. Sept. 19981998182Modelljahre 1999Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Fahrzeugbeschreibung: Personenkraftwagen. Ein Halteclip der Armaturenbrettisolierung war nicht vollständig an der Durchführung des Gaszugs im Armaturenbrett montiert. Der Clip kann sich vom Gaszug lösen und in den Bereich des Drehgelenks des Gaspedalhebels fallen.
These vehicles may have a front seat belt buckle attaching stud that may have been improperly heat treated. This heat treating may have resulted in cracks developing in the stud. If the stud is cracked, there is the potential for less than the intended level of occupant restraint in the event of a vehicle crash. Correction: Seat belt buckle mounting bracket and stud assembly will be replaced on affected vehicles.
Transport Canada28. Aug. 19981998173Modelljahre 1998–1999Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Vehicle description: Passenger vehicles equipped with manual seat tracks. The front seat belt buckle attaching stud may have been improperly heat treated. This heat treatment may have resulted in cracks developing in the stud.
NHTSA · USA25. Aug. 199898V198000Modelljahre 1998–1999Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
These vehicles do not comply with c.M.V.S.S. 108 - lighting system and retroreflective devices. The headlight aiming instructions provided in the owner guides are not sufficiently clear. Correction: Revised owner guides will be mailed to owners.
Transport Canada26. März 19981998050Modelljahre 1997–1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Vehicle description: Passenger vehicles. The text and/or graphics for the vehicle headlamp aiming instructions provided in the owner guides are not sufficiently clear. This does not meet the requirements of fmvss no. 108, "lamps, reflective devices, and associated equipment."
The automatic transaxle park mechanism may not prevent the vehicle from rolling even if the transaxle shift lever is firmly placed in the "park" position. If the driver is unaware that the park mechanism of the transaxle has not properly engaged and leaves the vehicle unattended without setting the parking brake, the vehicle could be free to roll as if in neutral. This could result in a crash without prior warning. Correction: Park mechanism will be inspected and, if necessary, a new park pawl shaft will be installed in the transaxle.
Transport Canada20. Sept. 19961996148Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The automatic transmission park pawl shaft may not be free to rotate as intended. If the park pawl shaft does not rotate, it would prevent the park pawl from engaging the park gear when the shift lever is in the park position.
The park pawl abutment bracket has a sharp edge which may cause the parking pawl to hang up and not engage the park gear. This may cause the vehicle to move even though the gear shift indicator shows that the vehicle is in park. As a result, unintended and unexpected vehicle movement could occur with the possibility of personal injury and property damage. Correction: Dealers will inspect and, if necessary, replace the park pawl abutment bracket on affected vehicles.
Transport Canada13. Sept. 19961996135Modelljahre 1996–1997Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The park pawl abutment bracket has a sharp edge which can cause the parking pawl to hang up and not engage the park gear. This would allow the vehicle to move even though the gear shift indicator shows that the vehicle is in park.
The park pawl shaft was improperly positioned when the roll pin that retains it was installed during transmission assembly. If the shaft was not properly positioned, the roll pin may not have lined up with the groove in the shaft and have been crushed at assembly. Also, a burr could have been raised on the shaft.
NHTSA · USA14. Mai 199696V086000Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
These vehicles may not comply with c.M.V.S.S. 105 - hydraulic brake systems. The brake system fluid level indicator may malfunction which could cause the brake system warning lamp to: (1) remain illuminated continuously, or (2) fail to illuminate as intended should the fluid level fall to a certain level. Correction: Brake system fluid level indicator lamp switches will be replaced on affected vehicles.
Transport Canada21. Feb. 19961996034Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).