Diese Akte sammelt die bekannten Mängel des Nissan Micra III, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.
11% of periodic inspections of this car in Finland found a fault on this item serious enough to fail the car (361 faults in 3,383 inspections in 2025): 2.4 times as often as cars of the same age.
The lower pinion needle bearing may have been omitted during manufacture of the steering gear due to insufficient controls in the suppliers manufacturing process. It is possible the pinion may disengage from the steering gear with loss of steering control.
DVSA · Vereinigtes Königreich4. Aug. 2015R/2015/135Modelljahre 2008Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.
Safety Gate · EU3. Juli 2015A12/0872/15Modelljahre 2002–2008Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The engine ECM unit may have an error with its software. This could under certain exceptional engine start circumstances result in the ECM setting an incorrect engine throttle valve position. When the engine speed is in excess of 3600 rpm the customer may briefly experience an unexpected acceleration. However the driver can counter this by applying the brakes.
Kein technisches Bulletin für dieses Modell gefunden.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0).