Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Nissan Juke

2010– · 3 generationen · 21 dokumentierte Mängel · 5 Märkte
Generationen
Modelljahr
Juke I · 2010–2019
RückrufKritischInnenraumEU

En raison d’une erreur dans le processus de pliage du coussin gonflable du conducteur, le bouclier…

En raison d’une erreur dans le processus de pliage du coussin gonflable du conducteur, le bouclier thermique peut ne pas se déplacer complètement autour du gonfleur lorsque l’airbag est activé. par conséquent, le gaz chaud peut directement entrer en contact avec le panneau avant de l’airbag, causant des dommages de brûlure au matériau du sac. en conséquence, l’airbag peut se déchirer pendant l’inflation réduisant sa fonction protectrice.

Safety Gate · EU · RappelConso · Frankreich26. März 2021a12/00391/21Modelljahre 2019Im Original (Französisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Juke I · 2010–2019
RückrufKritischInnenraumJP

始動装置

イグニッションスイッチのポジション保持用スプリングにおいて、成形設備のメンテナンスが不適切なため、成形時に傷がついたものがある。そのため、イグニッションキー操作の繰り返しによって当該スプリングが破損し、イグニッションキーに多数のキーホルダー等の重量物を装着していると、走行中の振動等によりイグニッションキーがON位置以外に回転し、車両電源が断たれてエンジンが停止するおそれがある。なお、この状態で事故を起こした場合、エアバッグが展開しない。

MLIT · Japan6. Sept. 20181143180Modelljahre 2016–2018Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Juke I · 2010–2019
RückrufKritischInnenraumUK

Airbag may release high temperature gases

In the event that the driver airbag is deployed during a frontal impact small holes may occur on the surface of the airbag. The holes are caused by high temperature gases from the airbag inflator exhausting directly onto the surface of the airbag material. The high temperature gas/airbag material may contact the drivers skin. The deployment performance of the driver airbag is not affected.

DVSA · Vereinigtes Königreich25. Feb. 2013R/2013/019Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Juke I · 2010–2019
RückrufKritischInnenraumEU

null In the event that the driver's airbag is deployed during a frontal impact, small holes may appear on…

null In the event that the driver's airbag is deployed during a frontal impact, small holes may appear on the surface of the airbag. The holes are caused by high temperature gas from the airbag inflator exhausting directly onto the surface of the airbag material. Contact of the high temperature gas / airbag material with the driver’s skin can cause burns.

Safety Gate · EU20. Feb. 2013A12/0243/13Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Juke II · 2019–
RückrufMittelInnenraumUK

Juke (F16) Vordergurt

Bei betroffenen Fahrzeugen kann der vordere Sicherheitsgurt während der Teilevorbereitung für die Montage versehentlich beschädigt worden sein.

DVSA · Vereinigtes Königreich7. Apr. 2025R/2025/118Modelljahre 2024Automatisch übersetzt · Original: EnglischDetails ansehen →
Juke I · 2010–2019Juke II · 2019–
Juke I · 2010–2019Juke II · 2019–
RückrufMittelInnenraumEU

Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch…

Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be securely latched when returned to its upright position after folding, and the occupant of the rear seat and any items stored in the luggage compartment may not be correctly restrained in the event of an accident, increasing the risk of injury.

Safety Gate · EU12. Okt. 2021A12/01430/21Modelljahre 2019–2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Juke I · 2010–2019
Juke I · 2010–2019Juke II · 2019–
Juke I · 2010–2019
Juke I · 2010–2019
RückrufMittelInnenraumKR

승차 및 실내장치

엔진시동 스위치를 누른 후 원위치로 복원되지 않음으로 인한 "엔진시동 직후 비상정지 기능 작동, 엔진시동 스위치 누름 안됨, 비상정기 기능 실행 안됨" 과 같은 제작결함

MOLIT · Südkorea24. Juli 20151707Modelljahre 2013Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Juke I · 2010–2019
RückrufMittelInnenraumJP

座席

後部座席の背もたれを固定するストライカにおいて、溶接設備の調節が不適切であったため、溶接が不十分なものがあり、衝突時に溶接がはがれるおそれがある。

MLIT · Japan12. Juli 20121129680Modelljahre 2012Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Juke I · 2010–2019
RückrufMittelInnenraumNA

Seats And Restraints

On certain vehicles, the rear seat latch strikers (which secure the seat backrest in the upright position) may have been manufactured incorrectly. As a result, the rear seat back strikers may deform during a frontal vehicle crash, which could increase the risk of injury to a rear seat occupant. Correction: Dealers will replace the rear seat latch strikers with updated versions.

Transport Canada12. Juli 20122012211Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Juke I · 2010–2019
RückrufMittelInnenraumNA

Seats

Nissan is recalling certain model year 2012 juke vehicles manufactured from february 3, 2012, through may 26, 2012. Due to an incomplete weld penetration, the rear seat back striker may partially separate in a crash.

NHTSA · USA12. Juli 201212V328000Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).