The turbocharger oil pipe ferrule material may have cracked during its forming process. In this condition there is a risk that the oil pipe may lose its sealing resulting in the leakage of oil from the vehicle. Depending on the severity of the leak and the vehicle conditions oil could contact hot areas in the engine room possibly resulting in fire.
DVSA · Vereinigtes Königreich10. Mai 2016R/2016/105Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
For affected vehicles the AdBlue Dosing Module may not have been initialised during the production process. In this condition the AdBlue Dosing Module does not trigger AdBlue injection and therefore NOx emissions are not controlled.
The injectors may not have been correctly torqued during assembly. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.
The torque value given in the Repair bulletin for R/2022/254 for the injector clamp bolts was insufficient. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.
The fuel filter support bracket may crack and the fuel filter could become insecure As a result the fuel filter and or fuel tube may leak.
DVSA · Vereinigtes Königreich5. März 2018R/2018/045Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).