Stalling problems (US safety investigation)
NHTSA, the US road safety agency, received a defect petition (DP84020) about this problem on 8 August 1984 for 1982–1983 models; it was closed on 11 April 1985 without a recall.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Nissan Stanza III erhalten
Diese Akte sammelt die bekannten Mängel des Nissan Stanza III, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.
NHTSA, the US road safety agency, received a defect petition (DP84020) about this problem on 8 August 1984 for 1982–1983 models; it was closed on 11 April 1985 without a recall.
NHTSA, the US road safety agency, received a defect petition (DP88001) about this problem on 29 September 1987 for 1985 models; it was closed on 19 February 1988 without a recall.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE88025) into this problem on 9 February 1988 for 1985 models; it was closed on 11 May 1988 without a recall.
Incorrect tire inflation pressures were printed on certification labels.
If a certain type of rear end collision occurs, the edge of a welded bracket on the floor panel subframe may pierce the fuel filler pipe. Consequence of defect: Fuel leakage would occur which could result in a fire. Vehicles would not comply with fmvss 301.
The involved vehicles do not conform to federal motor vehicle safety standard no. 105, "hydraulic brake systems", due to the brake pedal height being adjusted lower than specifications. If a vehicle has such a misadjustment it could also experience partial brake system disablement.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0).