Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
New Subaru Recall Campaign: WQS-54 Driver Assist System Delay in Warning Indicator. The programming of the driver assist system will not detect a fault in one of the associated system components. In the event of brake lamp switch (BLS) failure, the Vehicle Dynamic Control (VDC) correctly detects the BLS failure, but the driver assist system will be delayed in detecting the BLS failure.
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.
This Service Information bulletin announces a running change made to the Steering Angle Sensor. The (new) -style originally used on Legacy and Outback has been adapted.
Subaru of America, Inc. (Subaru) is recalling certain vehicles equipped with a driver assist system The programming of the driver assist system will not detect a fault in one of the associated system components. In the event of brake lamp switch (BLS) failure, the Vehicle Dynamic Control (VDC) correctly detects the BLS failure, but the driver assist system will be delayed in detecting the BLS failure.
The WQS?54 Repair Procedure Bulletin has been posted on STIS. Coverage information for all affected Stop?Sale vehicles is available on subarunet.com. Subaru of America, Inc. (Subaru) is recalling certain vehicles equipped with a driver assist system: ? 2015 model year Legacy vehicles ? 2015 model year Outback vehicles ? 2015 model year Impreza vehicles ? 2015 model year XV Crosstrek vehicles ? 2016 model year WRX vehicles The programming of the driver assist system will not detect a fault in one of the associated system components. In the event of brake lamp switch (BLS) failure, the Vehicle Dynamic Control (VDC) correctly detects the BLS failure, but the driver assist system will be delayed in detecting the BLS failure.
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding.
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation.
Hybrid (HEV) Models ONLY. This bulletin announces reprogramming file availability to optimize the Transmission Control Module (TCM). These files will address isolated customer concerns of a ?shock? or ?bump? feeling felt during low speed braking during engine warm-up after a cold soak.
This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. VDC and/or EyeSight) warning lamp to illuminate.
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding. These latest software updates contain new logic to address the following concerns: ? Mirrorlink 1.1 updates ? Enable Mute function for Navigation guidance ? Incomplete display of intersection names in combination meter ? Increased accuracy of the XM Traffic information displayed ? Intermittent delay (approximately 1 minute) in display of map information after initial start-up of Navigation function (2015MY Legacy and Outback only).
Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding.
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7" display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding.
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio units with 7" display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding. These latest software updates contain new logic to address the following concerns: * Mirrorlink 1.1 updates * Enable Mute function for Navigation guidance * Incomplete display of intersection names in combination meter * Increased accuracy of the XM Traffic information displayed * Intermittent delay (approximately 1 minute) in display of map information after initial start-up of Navigation function (2015MY Legacy and Outback only).
Audio volume level drops while driving - this bulletin provides a service procedure to address a customer concern of the audio volume level decreasing when slowing the vehicle from speeds above 25 mph by applying the brake.
Service bulletin if you receive a customer concern of the eps warning light coming on and diagnostics show a dtc c2532 stored in memory, a new eps control unit is now available to address this code. There may also be a customer concern of increased steering effort along with the eps warning light coming on.
Beginning with the vin numbers listed in the chart below, body plugs must be installed into the tie-down holes on both sides of the vehicle during pdi. The plugs are placed in the vehicles glove box during port processing. The installation of these plugs eliminates these openings as a source of dust intrusion into the vehicle.
Subaru: An issue of increase steering effort, electric power steering (eps) warning light comes on with diagnostic trouble code (dtc) c2532 and to address code a new eps control unit that is available. Model 2014 forester, 2012-14 impreza, xv crosstrek (including hybrid). *pe
Subaru: Tsb contains an owner's notification letter. Select document search button below. In certain vehicles there is a delayed in detecting a failure of brake lamp switch (bls) by driver assist system and takes longer for vehicle dynamic control (vdc) to receive request, resulting in no automatic braking. Model 2015 legacy, outback, impreza, xv crosstrek, 2016 wrx. *pe
Subaru: Information provided regarding repair and inspection of camshaft position issues and also, check engine light coming on, extended cranking or no start, rough idle. Conditions may be caused by camshaft position sensor out of specification. Models 2012 and 2013 impreza and xv crosstrek. *pe
Dieses Bulletin enthält Referenztabellen und Fotos, die zur Bestimmung des Lieferanten und der Generation der Infotainment-Head-Unit verwendet werden können.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).