Bulletin
This bulletin announces a revised replacement procedure for installation of the front crankshaft oil seal. Includes all 2011MY+ vehicles with FA or FB Engines.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Subaru Outback IV erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
This bulletin announces a revised replacement procedure for installation of the front crankshaft oil seal. Includes all 2011MY+ vehicles with FA or FB Engines.
This announcement relates to specific 2013 outback 2.5i limited federal specification models (ddf) that include the special appearance package (option 23/35) and are either crystal black (cb2) or satin white pearl (sp2) in color which have been identified as having a pzev badge incorrectly installed on the rear gate. These specific vehicles are federal specification for emissions and not pzev. This is strictly a badge-related exception and does not affect any other aspects of the vehicle. All other vehicle labeling and invoicing is correct. Although we have limited this situation, some of the affected vehicles have and will make it through to the allocated dealer.
This bulletin outlines a procedure for removal of the pzev badging which was inadvertently installed on the rear gate of 1,766 fed emission specification vehicles. The other emission labeling on these vehicles is correct. Owners of vehicles which have already been retailed will be receiving a notification letter requesting they return to their subaru dealer for removal of the pzev badging.
ECM Reprogramming for Extended Engine Cranking
This Bulletin provides a procedure for diagnosis and determination of necessary part replacement in the event any of the ?AVCS Slow Response? or ?AVCS System Failure? DTCs listed above are found to be stored in the ECM memory. A possible cause of these conditions is contamination within the camshaft sprocket and / or oil control solenoid valve (OCV) mechanism.
This bulletin provides information regarding a change made to the surface treatment applied to the oil control piston rings for 2.5l fb engines. The change was made as a result of some limited findings of unanticipated wear of these rings. Oil consumption will be higher than normal and consistent, if this wear occurs, the condition remains until repair. Unusual swings or variations in oil consumption are not consistent with this condition and may be the result of vehicle usage rather than the condition described here. Additional information is supplied in this bulletin to assist in the assessment and determination if vehicle usage is a reason for this varied oil consumption.
This bulletin provides information regarding a change made to the surface treatment applied to the oil control piston rings for 2.5l fb engines. The change was made as a result of some limited findings of unanticipated wear of these rings. Oil consumption will be higher than normal and consistent, if this wear occurs, the condition remains until repair. Unusual swings or variations in oil consumption are not consistent with this condition and may be the result of vehicle usage rather than the condition described here. Additional information is supplied in this bulletin to assist in the assessment and determination if vehicle usage is a reason for this varied oil consumption.
"this bulletin provides information regarding a change made to the surface treatment applied to the oil control piston rings for 2.5l fb engines. The change was made as a result of some limited findings of unanticipated wear of these rings. Oil consumption will be higher than normal and consistent, if this wear occurs, the condition remains until repair. Unusual swings or variations in oil consumption are not consistent with this condition and may be the result of vehicle usage rather than the condition described here. Additional information is supplied in this bulletin to assist in the assessment and determination if vehicle usage is a reason for this varied oil consumption."
Surface treatment change to oil control piston rings
Surface treatment change to oil control piston rings
Surface treatment change to oil control piston rings
Subaru of america, inc. Has determined that a defect, which relates to motor vehicle safety, exists in certain 2013my subaru tribeca and 2014my subaru legacy and outback vehicles equipped with 5eat (6 cylinder engine only).
Surface treatment change to oil control piston rings - the change was made as a result of some limited findings of unanticipated wear of these rings.
"difficulty starting, rough idle, cam position or misfire dtcs p0340, p0341, p0345, p0346, p0365, p0366, p0390, p0391, p0301, p0302, p0303 or p0304 - this bulletin provides inspection and repair procedures for intake and exhaust camshaft position-related and/or engine misfire dtcs for the fa and fb engine-equipped models listed above."
This bulletin provides a procedure for diagnosis and determination of necessary part replacement in the event any of the avcs slow response or avcs system failure dtcs listed above are found to be stored in the ecm memory. A possible cause of these conditions is contamination within the camshaft sprocket and / or oil control solenoid valve (ocv) mechanism.
Surface treatment change to oil control piston rings - the change was made as a result of some limited findings of unanticipated wear of these rings.
This bulletin announces the availability of ecm reprogramming files to address an extended engine cranking condition caused by camshaft positioning at the time the engine is shut off.
This bulletin provides a procedure for diagnosis and determination of necessary part replacement in the event any of the avcs slow response or avcs system failure dtcs listed above are found to be stored in the ecm memory. A possible cause of these conditions is contamination within the camshaft sprocket and / or oil control solenoid valve (ocv) mechanism.
Surface Treatment Change To Oil Control Piston Rings
Surface Treatment Change To Oil Control Piston Rings
Surface Treatment Change To Oil Control Piston Rings
surface treatment change to oil control piston rings
Surface Treatment Change To Oil Control Piston Rings
Surface Treatment Change To Oil Control Piston Rings
Drive Magazine article titled ?Engine Oil, Maintenance and Warnings?
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).