Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Tesla: Due to isolation of model s high voltage, a monitor is installed in battery to ensure no electrical current, between vehicle and high voltage conductor, is being carried and is measured, periodically, for resistance between high voltage conductors and chassis. No model or model years listed. *pe
Tesla: Drive button modification; incorrect drive buttons installed. A number of vehicles have been fitted with incorrect drive buttons. The suspect part causes an intermittent failure and lockup of all shift functions when the drive button is depressed. (roadster 2010). *pe
Tesla: Intermittent no start or charge. The implementation of a simple fix for a power drain caused by the immobilizer system which results in a contractor power fault in e.U. 2.0 power train vehicles. The fix is an adapter which plugs into wiring harness at point where center console connects to harness. *pe
Tesla motors: Transmission vent retrofit. Early transmission vents equipped with snorkel type vents may leak transmission oil. Snorkel type vents were installed on the first 200 transmissions in production. An improved vent has been designed that installs in the old top fill plug location. *pe
Tesla: Bent pins on the compressor controller connector of hvac 400v controller. The misaligned pins bent during installation of connector on assembly line. *pe
Tesla: The high voltage interlock loop (hvil) diagnostic guide. This is not an official bulletin. No model types or model years were provided. *js updated 10/21/14. *pe
Tesla: When removing the battery pack these procedures need to be followed in order to ensure proper sealing of the hv rapid mate. No model or model years given. *js
Tesla: Information provided in regards to assembling a new sealed bearing dual pem/motor fan that is retrofit dual design to replace two separate fans with a single assembly to improve reliability and function in adverse weather conditions. *pe
Tesla: Information regarding the motor and pem fans where certain types of weather conditions, such as snow, may accumulate too close and cause adverse affect on the airflow and cooling efficiency. This may shortened the useful life of either fans or motor. *pe
Tesla: During normal operation of vehicle, aps cable grommet can become dislodged. To improve security against water ingress a new design has been provided. *pe
Tesla: Updated-switchpack not charging auxiliary battery; switchpack charge circuit malfunction prevents auxiliary battery from charging. Some vehicles may experience a malfunction of the charging circuit in the switchpack which may result in the auxiliary 12 v battery not being charged. *pe
Tesla: Different transmission fill procedure for transmissions with low fill plug levels. Early g1bw transmissions come with a fill plug that is cast lower than the fill level. This requires a different procedure when filling transmissions. There are 56 known transmissions with this style fill plug/transmission casting. Transmissions castings are designated by metal tag attached near the fill plug. *pe
Tesla vehicle: Isolation failures inside hvac heater module. The ptc heater inside the hvac has the potential to develop an isolation fault. This failure arises when operating the a/c in humid conditions. *pe
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).