Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Toyota C-HR II

2023– · 0 dokumentierte Mängel · 1 Märkte

Diese Akte sammelt die bekannten Mängel des Toyota C-HR II, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.

Schwerwiegendste Mängel

Für diese Auswahl ist noch kein Mangel dokumentiert.

Neueste Rückrufe

Alle ansehen (2) →
RückrufMittelElektrikNA

High Voltage

Issue: On certain vehicles, under certain conditions, a software problem in the battery electric vehicle control unit (BEV ECU) could cause the electric drive system to shut down while driving. If this happens, there could be a sudden loss of power to the wheels. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: To reduce the safety risk, Toyota advises that you should limit the vehicle's maximum state of charge to no more than 80% until the recall repairs have been completed. Toyota will notify owners by mail and advise you to take your vehicle to a dealership to update the BEV ECU software.

Transport Canada2. Sept. 20262026421Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufKritischElektrikNA

Electrical system:Propulsion system

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2026 C-HR battery electric vehicles. A software programming error may cause the electric drive system battery to become overcharged under certain driving conditions, which can shut down the electric drive system and result in a loss of drive power.

NHTSA · USA2. Sept. 202626V570000Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste technische Bulletins

Alle ansehen (20) →
BulletinMittelFahrwerkNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2027 model year C-HR BEV vehicles

NHTSA · Herstellerbulletin11037189Modelljahre 2027Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

State of Health (SOH): An estimate of battery health that is updated as the vehicle learns from operating and charging conditions over time. Distance Since Last Update: Indicates the distance accumulated since the last SOH calculation. A default mileage value of 40,727 at SOH 100% may be displayed until sufficient vehicle learning is completed. Once SOH value updates from 100%, the Distance Since Last Update value will re-set to 0 miles. Both SOH and Distance Since Last Update values will continue to update as the vehicle continues to learn.

NHTSA · Herstellerbulletin11036131Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

Some 2026 model year bZ, bZ Woodland, and C-HR BEV vehicles may exhibit the Diagnostic Trouble Code (DTC) U255221F associated with the level 3 DC fast charging. Under certain conditions, charging may either operate normally or experience failure, with a charging malfunction message displayed on the Multi-Information Display (MID). This condition is attributed to a control logic issue and potential voltage drop affecting Plug-In Charge Control Computer Assembly functionality. The control logic has been modified to reduce the possibility of this condition.

NHTSA · Herstellerbulletin11036124Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).