Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Toyota 4Runner

1981– · 7 generationen · 42 dokumentierte Mängel · 5 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

Modelljahr
4Runner IV · 2002–2009
BulletinKritischMotorNA

Bulletin

Händlerschreiben: 23. März 2018. Der Abschnitt „Teilebestellung“ wurde aktualisiert. Toyota wird eine Sonderservicekampagne (Special Service Campaign, SSC) starten, um den Kraftstoffpulsationsdämpfer bei bestimmten Toyota 4Runner V6 des Modelljahres 2003 (Model Year, MY) auszutauschen. Bei bestimmten frühen Fahrzeugen des Modelljahres 2003 mit 4Runner V6 wurde der Kraftstoffpulsationsdämpfer, der sich an der Kraftstoffverteilerleiste (Fuel Rail) befindet, möglicherweise fehlerhaft montiert. Fällt der Pulsationsdämpfer aus, kann eine geringe Menge Kraftstoff austreten. Im schlimmsten Fall kann dies zu einem Motorraumbrand führen, wenn eine Wärme- oder Zündquelle vorhanden ist.

NHTSA · Herstellerbulletin10152124Modelljahre 2003Automatisch übersetzt · Original: EnglischDetails ansehen →
4Runner IV · 2002–2009
BulletinKritischMotorNA

Bulletin

The fuel pulsation damper, located on the fuel rail, may have been improperly assembled. If the puslation damper fails, a small amount of fuel may leak. This may result in an engine compartment fire. Toyota initiated special service campaign 30c to replace the fuel pulsation damper. *tt

NHTSA · Herstellerbulletin10001579Modelljahre 2003Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelInnenraumNA

Bulletin

2026 Modelljahr Toyota-Fahrzeuge sind mit Fußmatten-Halteclips auf der Fahrerseite ausgestattet, um die Fußmatte in der richtigen Position zu sichern. Bei einigen Modellen können außerdem Halteclips für Fußmatten auf der Beifahrerseite und im Fond verwendet werden. Bei der Auslieferungsvorbereitung (Pre-Delivery Service, PDS) ist gemäß dem entsprechenden Installationsverfahren die Fußmatte auf der Fahrerseite sowie gegebenenfalls die Fußmatten auf der Beifahrerseite und im Fond mithilfe der Fußmatten-Halteclips am Fahrzeugteppich zu befestigen.

NHTSA · Herstellerbulletin11034826Modelljahre 2026Automatisch übersetzt · Original: EnglischDetails ansehen →
4Runner VI · 2024–
BulletinMittelFahrwerkNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 7 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2026 model year 4Runner and 4Runner Hybrid vehicles

NHTSA · Herstellerbulletin11032475Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelFahrwerkNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year 4Runner and 4Runner Hybrid vehicles. Refer to T-SB-0023-25, the universal Check Sheet that contains PDS steps that apply to all 2026 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0009-25, Long-Term Vehicle Storage Guidelines.

NHTSA · Herstellerbulletin11026310Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelKarosserieNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner Hybrid vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

NHTSA · Herstellerbulletin11024100Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelKarosserieNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

NHTSA · Herstellerbulletin11024091Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelBremsenNA

Bulletin

Some 2024 2025 model year Land Cruiser, and 2025 model year 4Runner and 4Runner Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving in reverse.

NHTSA · Herstellerbulletin11024073Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelBremsenNA

Bulletin

Some 2024 2025 model year Land Cruiser, and 2025 model year 4Runner and 4Runner Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving in reverse.

NHTSA · Herstellerbulletin11021727Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelSonstigesNA

Bulletin

The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.

NHTSA · Herstellerbulletin11020657Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelInnenraumNA

Bulletin

2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · Herstellerbulletin11020645Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelKarosserieNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner Hybrid vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

NHTSA · Herstellerbulletin11016791Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelElektrikNA

Bulletin

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

NHTSA · Herstellerbulletin11016782Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelKarosserieNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner Hybrid vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

NHTSA · Herstellerbulletin11015505Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelElektrikNA

Bulletin

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

NHTSA · Herstellerbulletin11015496Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelElektrikNA

Bulletin

Some 2021 2025 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.

NHTSA · Herstellerbulletin11014209Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelInnenraumNA

Bulletin

2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers.

NHTSA · Herstellerbulletin11014187Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelKarosserieNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0023-24, Long-Term Vehicle Storage Guidelines

NHTSA · Herstellerbulletin11012765Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelInnenraumNA

Bulletin

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · Herstellerbulletin11012745Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelBremsenNA

Bulletin

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

NHTSA · Herstellerbulletin11012743Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelBremsenNA

Bulletin

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

NHTSA · Herstellerbulletin11007444Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelBremsenNA

Bulletin

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

NHTSA · Herstellerbulletin11006150Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelInnenraumNA

Bulletin

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · Herstellerbulletin11005112Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner VI · 2024–
BulletinMittelInnenraumNA

Bulletin

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · Herstellerbulletin11005054Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
4Runner V · 2009–2024
BulletinMittelInnenraumNA

Bulletin

TSB: 2024 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

NHTSA · Herstellerbulletin10252249Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).