Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Toyota Sequoia

2000– · 3 generationen · 22 dokumentierte Mängel · 3 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
Sequoia III · 2022–
BulletinMittelFahrwerkNA

Bulletin

Die Auslieferungsinspektion (Pre-Delivery Service, PDS) ist ein entscheidender Schritt, um unsere Neuwagenkunden zufriedenzustellen. Kundenrückmeldungen zeigen, dass bei der PDS folgenden Bereichen besondere Aufmerksamkeit gewidmet werden sollte: sorgfältige Prüfung auf Lackabplatzer/Kratzer und Karosseriebeulen/Dellen. Ordnungsgemäße Funktion der elektrischen Zubehörteile (einschließlich Innenraumbeleuchtung, Uhr und Rücksetzen des Radios). Sauberkeit des Innenraums. Ordnungsgemäße Funktion der mechanischen Systeme. Der PDS-Prozess hilft, mögliche Fahrzeugprobleme vor der Übergabe an den Kunden zu erkennen. Nach Abschluss des PDS-Prozesses sind genaue PDS-Aufzeichnungen zu führen, indem sichergestellt wird, dass die unten aufgeführten erforderlichen Dokumente gemäß der Toyota-Garantierichtlinie ausgefüllt und erfasst werden. GTS+ Health Check. Ausgefülltes PDS-Prüfblatt. Ausdruck des Batterieladetests. GTS+ Reifendruckinformationen. Die Kundenbindung und die ordnungsgemäße Wartung der Fahrzeuge sind und waren stets ein Hauptanliegen von Toyota. Um Kunden daran zu erinnern, dass regelmäßiger Service für die ordnungsgemäße Wartung des Fahrzeugs unerlässlich ist, müssen Händler vor der Auslieferung einen Serviceerinnerungsaufkleber anbringen. Auf diese Weise werden die Kunden daran erinnert, für einen Service in Ihren Betrieb zurückzukehren. Ihr aktueller Serviceerinnerungsaufkleber kann verwendet werden. Dieses Bulletin enthält die PDS-Verfahren, die speziell für Fahrzeuge des Modelljahres 2027 Sequoia Hybrid gelten.

NHTSA · Herstellerbulletin11039878Modelljahre 2027Automatisch übersetzt · Original: EnglischDetails ansehen →
Sequoia II · 2007–2022
BulletinMittelKarosserieNA

Bulletin

Dieses Kundendienstprogramm deckt die Turboladerbaugruppen des Motors bei bestimmten Fahrzeugen der Modelljahre 2022 bis 2025 Tundra, Modelljahre 2022 bis 2025 Tundra HV und Modelljahre 2023 bis 2025 Sequoia ab. Der durch dieses Programm abgedeckte spezifische Zustand ist die Korrosion der Wastegate-Buchse und des Wastegate-Bolzens der Turboladerbaugruppe aufgrund von Material- oder Verarbeitungsfehlern. Tritt dies auf, leuchtet nach dem Motorstart die Motorwarnleuchte auf, und die Beschleunigungsleistung kann sich verringern. Wenn die Motorwarnleuchte aufleuchtet, werden im elektronischen Motorsteuergerät (ECU) die Diagnose-Fehlercodes (DTCs) P25B372, P25B473, P25B572 und/oder P25B673 gespeichert. Wird der Zustand bestätigt, wird das Fahrzeug im Rahmen der Bedingungen dieses Kundendienstprogramms mit verbesserten Turboladern repariert.

NHTSA · Herstellerbulletin11039874Modelljahre 2022Automatisch übersetzt · Original: EnglischDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

2026 Modelljahr Toyota-Fahrzeuge sind mit Fußmatten-Halteclips auf der Fahrerseite ausgestattet, um die Fußmatte in der richtigen Position zu sichern. Bei einigen Modellen können außerdem Halteclips für Fußmatten auf der Beifahrerseite und im Fond verwendet werden. Bei der Auslieferungsvorbereitung (Pre-Delivery Service, PDS) ist gemäß dem entsprechenden Installationsverfahren die Fußmatte auf der Fahrerseite sowie gegebenenfalls die Fußmatten auf der Beifahrerseite und im Fond mithilfe der Fußmatten-Halteclips am Fahrzeugteppich zu befestigen.

NHTSA · Herstellerbulletin11034826Modelljahre 2026Automatisch übersetzt · Original: EnglischDetails ansehen →
Sequoia III · 2022–
BulletinMittelFahrwerkNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check. Completed PDS Check Sheet. Battery Charge Test Print Out. GTS+ Tire Pressure Information. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery.

NHTSA · Herstellerbulletin11021731Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · Herstellerbulletin11020645Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers.

NHTSA · Herstellerbulletin11014187Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · Herstellerbulletin11012745Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelGetriebeNA

Bulletin

Some 2023 model year Sequoia Hybrid and 2022 2023 Tundra Hybrid vehicles may exhibit an oil leak between the automatic transmission and the hybrid module assembly, and the source of the oil leak is from the hybrid module output shaft seal. The hybrid module assembly has been updated to minimize this condition.

NHTSA · Herstellerbulletin11010345Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · Herstellerbulletin11005112Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · Herstellerbulletin11005054Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

TSB: 2024 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

NHTSA · Herstellerbulletin10252249Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia II · 2007–2022
BulletinMittelSonstigesNA

Bulletin

PANT: These new Toyota Genuine MVP Air Filters are available as customer-paid replacements installed by a Toyota dealer or sold over the counter. These Toyota Genuine Parts are covered by Toyota?s Service Part Warranty for a period of 12 months, regardless of mileage, from the date of installation.

NHTSA · Herstellerbulletin10251749Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

TSB: 2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

NHTSA · Herstellerbulletin10251746Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelElektrikNA

Bulletin

TSB: Some 2016 ? 2023 model year Toyota vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32F or 0C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.

NHTSA · Herstellerbulletin10247820Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelElektrikNA

Bulletin

TSB: Some 2016 ? 2023 model year Toyota vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32F or 0C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.

NHTSA · Herstellerbulletin10247796Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

TSB: 2024 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

NHTSA · Herstellerbulletin10244124Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelElektrikNA

Bulletin

TSB: Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

NHTSA · Herstellerbulletin10241404Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

TSB: 2024 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

NHTSA · Herstellerbulletin10238156Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia I · 2000–2007
BulletinMittelGetriebeNA

Bulletin

Toyota Original Simmerring-Lippenfett (Seitenlippe) wird beim Ein- und Ausbau der Antriebswelle verwendet, um zu verhindern: ? Das Eindringen von Wasser, Staub usw. ? Die Verbesserung der Dichtleistung ? Die Verringerung des Gleitwiderstands

NHTSA · Herstellerbulletin10234321Automatisch übersetzt · Original: EnglischDetails ansehen →
Sequoia III · 2022–
BulletinMittelKarosserieNA

Bulletin

TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ?Careful inspection for paint chips/scratches and body dents/dings. ?Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ?Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of ?Final Inspection and Cleaning.?) This bulletin contains the PDS procedures that apply specifically to 2023 model year Sequoia HV vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2023 model year Toyota vehicles has been developed. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, be sure to follow Long-Term Vehicle Storage Guidelines.

NHTSA · Herstellerbulletin10230374Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelKarosserieNA

Bulletin

TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ?Careful inspection for paint chips/scratches and body dents/dings. ?Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ?Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of ?Final Inspection and Cleaning.?) This bulletin contains the PDS procedures that apply specifically to 2023 model year Sequoia HV vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2023 model year Toyota vehicles has been developed. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, be sure to follow Long-Term Vehicle Storage Guidelines.

NHTSA · Herstellerbulletin10224167Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia III · 2022–
BulletinMittelInnenraumNA

Bulletin

TSB: 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference

NHTSA · Herstellerbulletin10220239Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia II · 2007–2022
BulletinMittelInnenraumNA

Bulletin

TSB: 2022 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference

NHTSA · Herstellerbulletin10210368Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia II · 2007–2022
BulletinMittelGetriebeNA

Bulletin

TT: For some 2021 Tundra and Sequoia vehicles, there may appear to be an ATF leak from the bellhousing area of the transmission. This condition is specifically focused on new vehicles and is typically found during the PDS inspection.

NHTSA · Herstellerbulletin10203551Modelljahre 2021Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sequoia II · 2007–2022
BulletinMittelInnenraumNA

Bulletin

TSB: 2022 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

NHTSA · Herstellerbulletin10203559Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).