The power steering oil cooler has an issue: due to improper manufacturing instructions, the pipe retaining feature at the tip of the union pipe was not machined correctly. As a result, when high hydraulic pressure is applied, the hose can come off, causing power steering fluid to leak. This can lead to loss of steering assist and, in the worst case, may result in a fire.
The connecting hose of the hydraulic power assisted steering system may detach from connecting pipe of the cooler. Consequently, hydraulic steering fluid could leak, resulting in a loss of steering control and increasing the risks of an accident, to following traffic and of a fire.
EU Safety GateJan 16, 2020A12/00017/20Model years 2016–2018View details →
Issue: On certain vehicles, the power steering cooler hose could detach. If this happens, power steering fluid can leak or spray in the engine compartment. This would result in a loss of power steering assist and create the potential for a fire. Safety Risk: A loss of power steering assist could increase the risk of a crash. A power steering fluid leak in the engine compartment could create the risk of a fire. Corrective Actions: Bentley will notify owners by mail and instruct you to take your vehicle to a dealer to replace the Power Assisted Steering (PAS) cooler hose.
Transport CanadaDec 9, 20192019612Model years 2017–2018View details →
Bentley Motors, Inc. (Bentley) is recalling certain 2017-2018 Continental Supersports vehicles. The Power Assisted Steering (PAS) cooler pipe may be the incorrect size, allowing the cooler hose to detach and leak power steering fluid.
NHTSA · United StatesDec 4, 201919V863000Model years 2017–2018View details →
null A pipe to the power-steering cooler can come loose, leading to a risk of fire as well as loss of power-steering assistance, which could lead to an accident.
EU Safety GateAug 2, 2017A12/1067/17Model years 2017View details →
In the engine compartment bulkhead, the stud bolts that secure the battery cable terminals have nuts whose tightening torque is improper on some vehicles, so the nuts may loosen due to vibration during driving. If the vehicle continues to be used in this condition, the battery cable terminal may make poor contact, causing the engine to fail to start. In addition, the poor contact increases electrical resistance, which generates heat and, in the worst case, may lead to a fire.
Due to incorrect routing of the pipes connecting the brake pumps to the hydraulic accumulators there is a possibility of a foul condition between these pipes which if not corrected could result in brake failure.
DVSA · United KingdomMar 21, 1997R/1997/023View details →
null In the rear axle of vehicles fitted with carbon ceramic brakes (CSIC), the stainless steel screws fixing the rotor to the metal bell may fail due to stress corrosion cracking if the vehicle has been used in extreme salt environments.
EU Safety GateOct 29, 2013A12/1497/13Model years 2006–2010View details →
Bentley is recalling 27 my 2009 continental flying spur and continental flying spur speed vehicles. There is the potential for the center rear seat belt upper guide bracket to distort in the event of a frontal impact. This distortion could result in the centre rear seat occupant traveling further forwards than the design intends.
NHTSA · United StatesJan 30, 200909V037000Model years 2009View details →
On vehicles equipped with ceramic disc rotors for the rear brakes, the bolts that attach the disc rotor to the bell housing are made of an inappropriate material. When used in environments with high salt concentration, these bolts may corrode and break, which can cause abnormal noise and vibration during driving.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).