Free to read · free account to contributeSuccessor to Anticars (2000)

BMW 3 Series E30

1982–1994 · 15 documented defects · 4 markets
Model year
MarketAllNAUK
RecallCriticalEngineNA

Fuel System

On certain 318I, 318IC, 318IS, 325IC, 325IS, 325IX, 525I, 535I, 735I and 735IL vehicles, the fuel feed hose could harden and "set" over time due to engine compartment temperatures. If this "setting" occurs, it is possible that seepage between the hose and fitting could result because the clamp cannot provide sufficient sealing force to compensate for the hardening of the hose. Fuel seepage, in the presence of an ignition source, could result in an engine compartment fire. Correction: fuel feed hoses and associated clamps will be replaced with ones of a new design.

Transport CanadaMay 30, 19941994096Model years 1989View details →
RecallCriticalEngineNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.

NHTSA · United StatesApr 11, 199494V066000Model years 1989View details →
RecallCriticalElectricalNA

Heater And Defroster

On certain 318I vehicles, under certain conditions, the interior heater water control valve may bind while closing. This binding or slow-closing condition may cause the valve solenoid to draw excessive current, possibly resulting in overheating of the valve connector wiring and insulation. This condition could result in a passenger compartment fire.

Transport CanadaSep 24, 19841984105Model years 1984View details →
RecallModerateEngineNA

Heater And Defroster

On certain 318I, 325I and M3 vehicles, elevated pressure in the cooling system due to overheating could result in cracking of the heater core end piece. Should this happen, coolant could be expelled onto the lower right leg of the driver, possibly resulting in personal injury and/or fogging of the interior surfaces of the windows causing reduced driver vision. Correction: A thermistatic bypass valve will be installed to control coolant temperature in the heater core. Also, a new design radiator cap will be installed to control pressure and provide greater overflow.

Transport CanadaJul 19, 19931993100Model years 1984–1989View details →
RecallModerateEngineNA

Engine

On certain 325IX vehicles, the oil dipstick tube attaching bracket may have been bent during the manufacturing process or during scheduled maintenance. This could possibly cause the dipstick to interfere with the throttle bellcrank lever's range of motion and prevent the lever from returning to the idle position after release of the accelerator pedal. Correction: Throttle bellcrank lever will be modified to provide sufficient clearance. Note: Vehicles with manual transmission only.

Transport CanadaApr 6, 19881988049Model years 1988View details →
RecallModerateEngineNA

Vehicle speed control:Cables

The oil dipstick tube attaching bracket may have been bent during production or scheduled maintenance, reducing the clearance between the dipstick ring and the throttle bellcrank lever.

NHTSA · United StatesMar 15, 198888V031000Model years 1988View details →
RecallModerateElectricalNA

Electrical

On certain 325E, 325ES, 528E, 535I, 635CSI and 735I vehicles, the center high mounted brake light could add sufficient electrical load to cause the brake light switch to overheat, eventually leading to melting of the plastic internal switch parts. This could cause the switch plunger to jam in the ON or OFF position. This would render the brake light permanently ON or OFF regardless of brake pedal operation. Correction: A brake light switch with an increased current load capacity will be installed on affected vehicles.

Transport CanadaNov 27, 19861986134Model years 1986–1987View details →
RecallModerateSuspensionNA

Steering

On certain 318I, 325, 325E and 325ES vehicles, when a significant force is applied directly to the steering gearbox as the result of certain frontal crash conditions or front end contact with an object on the road, the steering column disengagement element, which is designed to reduce the amount of steering wheel rearward travel, could disengage completely. This would result in loss of post impact steering maneuverability without prior warning. Correction: Two plates will be bolted to the disengagement element to ensure that the element will not completely disengage in the event of an impact to the steering gear.

Transport CanadaOct 22, 19861986117Model years 1984–1986View details →
RecallModerateSuspensionNA

Steering: Steering wheel/handle bar

The two parts of the steering column disengagement element could completely disconnect if the car contacts an object in the roadway or elsewhere of sufficient mass to apply a significant force directly to the steering gearbox. Consequence of defect: Steering control would be lost.

NHTSA · United StatesOct 20, 198686V138000Model years 1985–1986View details →
RecallModerateEngineNA

Fuel system, gasoline:Carburetor system

The idle control valve which controls idle speed by varying the amount of intake air that bypasses the throttle plate is subject to backfire into the intake manifold. Such backfire can damage the valve and cause the idle valve plate to remain open. Consequence of defect: This will result in abnormally high idle speed.

NHTSA · United StatesMay 6, 198585V058000Model years 1984View details →
RecallModerateEngineNA

Engine

On certain 320I vehicles, crack in the exhaust system between the exhaust pipe and the catalytic converter could result in exhaust emissions which do not comply with CMVSS 1103.

Transport CanadaDec 22, 19831983121Model years 1981–1982View details →
RecallMinorEngineNA

Engine

On certain 318I vehicles, improper starting procedure could cause a backfire into the intake manifold and damage internal components of the idle control valve. This could result in abnormally high idle speed and if warnings of increased engine noise level and tachometer reading are not heeded, a vehicle crash could occur.

Transport CanadaJun 6, 19851985072Model years 1984View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).