Free to read · free account to contributeSuccessor to Anticars (2000)

BMW M3

1986– · 6 generations · 15 documented defects · 2 markets
Generations

Service bulletins (TSBs) are repair instructions manufacturers send to their dealers about known problems. They are not safety recalls, but they often confirm a defect.

Model year
MarketAllNA
F80 M3 · 2014–2018
BulletinCriticalSuspensionNA

Bulletin

0Replacement of Steering Gear Due to Accident Damage. INFORMATION The steering gear does NOT have to be replaced if: ? There is no visible damage to front axle parts such as spring struts, hubs or spindles, control arms or wishbones, thrust or tension rods or stabilizers performing a locating function, steering drop arms or Pitman arms, track rods or drag links, tie rods, front axle subframe, steering column, and attachment points for suspension components to body. ? There is no binding or increase in turning effort when operating the steering gear from lock to lock with engine off. ? The impact has not caused the wheel alignment to become not adjustable within specified tolerances using normal adjustment procedures. The steering gear MUST be replaced if: ? There is visible damage to the steering gear, including blackening or discoloration of the housing from fire damage. ? Electric steering gear (EPS) version: Examine the control unit with all plug connections for damage and hairline cracks. ? There is any permanent deformation or cracks on: ? Wheel rims in the event of a negative result from the wheel/axle alignment check ? Spring struts, steering stubs, wheel carriers ? Wishbones ? Struts, trailing links or the anti-roll bar with this function ? Body side screwing/attachment points for wheel guide control components ? Front axle support ? Pitman arms https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/21101.1.M320405....3/2/2015 Page 2 of 2 ? Tie rods ? Steering box fixtures ? Steering column The steering column MUST be replaced if visibly damaged, deformed or broken. If a recommended replacement with the criteria described above is refused by the customer or insurance company, this should be noted in the repair order and signed by the refusing party.

NHTSA · manufacturer bulletin10147112View details →
E90/92/93 M3 · 2007–2013
BulletinCriticalElectricalNA

Bulletin

"? NO REGENERATION OF THE DIESEL PARTICULATE FILTER (DPF) This Service Information bulletin supersedes SI B18 03 10 dated November 2010. . The Service Engine Soon lamp is illuminated. The following fault codes may be stored in the DDE: N47T/N57T engine 245700 - Particle filter system: particulate filter highly loaded (Exhaust backpressure high) 245800 - particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) M57Y engine 480A Particle filter system - filter is heavily contaminated. (exhaust backpressure is too high) 481A Particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) CAUSE 1. Faults with the exhaust system that affect the monitoring of the DPF by the DDE 2. Unfavorable recent driving profile INFORMATIOM During normal driving, there is a continuous regeneration of the diesel particulate filter that takes place at exhaust-gas temperatures between 280 and 350C (slower oxidation process). The soot particles can only be burned off when the required exhaust-gas temperature has been reached. Under certain driving conditions (i.e., prolonged short trips or an exhaust system which never reaches soot burn-off temperatures), the DPF can become restricted. The DDE will initiate periodic regeneration automatically, at the latest after 600 miles. In vehicles making many short distance journeys, periodic regeneration takes place after only 250-500 miles. The Digital Diesel Electronics control unit evaluates the time for periodic regeneration from the following values: average distance driven average driving speed temperature in the diesel particulate filter values from the exhaust pressure sensor The DDE initiates the regeneration process by decreasing incoming air by the throttle valve, and one or two post injections are executed. This heats the exhaust-gas temperature to approx. 600 C . When the exhaust temp reaches this point: The soot is burned off with the residual oxygen. The

NHTSA · manufacturer bulletin10146535Model years 2011View details →
M3 (E46) · 2000–2006
G80 M3 · 2020–
BulletinModerateSuspensionNA

Bulletin

When turning the steering wheel while stationary or when driving on uneven roads; cracking, creaking, or knocking noises may be heard.

NHTSA · manufacturer bulletin11021817Model years 2024View details →
G80 M3 · 2020–
BulletinModerateBrakesNA

Bulletin

There may be an internal leakage in the brake fluid expansion tank (aka brake fluid reservoir). In the rare case of a leak, the filling level sensor might malfunction over a relatively long period of time.

NHTSA · manufacturer bulletin11021109Model years 2024View details →
G80 M3 · 2020–
BulletinModerateBrakesNA

Bulletin

Brake groaning noises heard at the rear axle at slow speeds, i.e. close to standstill, stop and go driving;when parking or maneuvering.

NHTSA · manufacturer bulletin11018518Model years 2024View details →
F80 M3 · 2014–2018
BulletinModerateSuspensionNA

Bulletin

At low outside temperatures (below 40 degrees F) and slow driving speeds (i.e. when parking, maneuvering)with a large steering angle, the front end can be slightly axially misaligned. This can be felt (jerking)/ heard via an acoustic acknowledgement (clunk) as seen at the 11 second mark of the video. See attached video V36 01 21.

NHTSA · manufacturer bulletin10249018Model years 2019View details →
E90/92/93 M3 · 2007–2013
BulletinModerateBrakesNA

Bulletin

Functional noises (squealing/honking) when braking shortly before the vehicle comes to a stop. CAUSE Material-

NHTSA · manufacturer bulletin10244237Model years 2011View details →
F80 M3 · 2014–2018
BulletinModerateSuspensionNA

Bulletin

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.

NHTSA · manufacturer bulletin10218384View details →
G80 M3 · 2020–
BulletinModerateSuspensionNA

Bulletin

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.

NHTSA · manufacturer bulletin10206690Model years 2021View details →
G80 M3 · 2020–
BulletinModerateOtherNA

Bulletin

The SIM card installed in the telematics control unit (ATM2) connects to different mobile providers' networks. However, due to a missing parameter, this does not work and can cause disruption in BMW ConnectedDrive services in areas with insufficient network coverage.

NHTSA · manufacturer bulletin10206692Model years 2021View details →
G80 M3 · 2020–
BulletinModerateSuspensionNA

Bulletin

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle maynot start when placing the key against the steering column.

NHTSA · manufacturer bulletin10204661Model years 2021View details →
G80 M3 · 2020–
BulletinModerateBrakesNA

Bulletin

When starting the vehicle vehicle at standstill, various yellow Check Control Messages CCMs appear. ID code 00042: Brake system. Additional notes: Avoid abrupt braking as far as possible. Drive at a moderate speed. Have it checked by your nearest Service Center. ID code 2046: Braking force assistance. Additional notes: Braking force assistance failure. Higher pedal force required for vehicle deceleration. Drive at a moderate speed. Have it checked by your nearest Service Center.

NHTSA · manufacturer bulletin10204625Model years 2021View details →
G80 M3 · 2020–
BulletinModerateBrakesNA

Bulletin

Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly.

NHTSA · manufacturer bulletin10201141Model years 2021View details →
G80 M3 · 2020–
BulletinModerateSuspensionNA

Bulletin

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle maynot start when placing the key against the steering column.

NHTSA · manufacturer bulletin10200484Model years 2021View details →
E90/92/93 M3 · 2007–2013
BulletinModerateBrakesNA

Bulletin

Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.

NHTSA · manufacturer bulletin10194296Model years 2011View details →
E90/92/93 M3 · 2007–2013
BulletinModerateElectricalNA

Bulletin

Butt connector for repairing a plug connection. The ?top up coolant? message is displayed in the central display (CC message ID 166). When checking the cooling system there are no leaks found and the expansion tank is filled to the proper level.

NHTSA · manufacturer bulletin10193494Model years 2013View details →
G80 M3 · 2020–
BulletinModerateSuspensionNA

Bulletin

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.

NHTSA · manufacturer bulletin10186895Model years 2021View details →
G80 M3 · 2020–
BulletinModerateSuspensionNA

Bulletin

LANE DEPARTURE WARNING - STEERING INTERVENTION TOO STRONG: The steering intervention for Lane Departure Warning (LDW) is too strong (severe), which can create an uncomfortable feeling for the driver. Background: Steering intervention helps keep the vehicle in the lane if the system detects that a lane marking has been crossed. The steering intervention can be noticed on the steering wheel and can be manually overridden at any time. Software error in the KAFAS (camera-based driver assistance system) control unit.

NHTSA · manufacturer bulletin10179823Model years 2020View details →
G80 M3 · 2020–
BulletinModerateElectricalNA

Bulletin

COMFORT ACCESS AND COMFORT GO NOT POSSIBLE: Vehicle cannot be unlocked/locked or started via Comfort Access. Remote control functionality is restored by pressing any of the key buttons or by removing and reinstalling the remote control key battery.

NHTSA · manufacturer bulletin10179824Model years 2020View details →
G80 M3 · 2020–
BulletinModerateSuspensionNA

Bulletin

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected. Software error in the BDC (Body Domain Controller) module.

NHTSA · manufacturer bulletin10179825Model years 2020View details →
G80 M3 · 2020–
BulletinModerateBrakesNA

Bulletin

TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving.

NHTSA · manufacturer bulletin10178996Model years 2020View details →
G80 M3 · 2020–
BulletinModerateBodyNA

Bulletin

SERVICE ACTION - CHECK SUNROOF SEALING: The sunroof frame may not have been properly sealed, causing a water leak into the vehicle. Improper sealing during production.

NHTSA · manufacturer bulletin10179002Model years 2020View details →
G80 M3 · 2020–
BulletinModerateBrakesNA

Bulletin

PREMATURE WEAR OF THE REAR AXLE BRAKE PADS WITH STANDARD BRAKES: The CBS data and Check Control (CC) message shows the rear axle brake pads are worn, and the vehicle has less than 15,500 miles. Increased residual braking forces in the rear axle brake calipers caused by production-related deviations on the surface of the piston ring seal.

NHTSA · manufacturer bulletin10177623Model years 2020View details →
G80 M3 · 2020–
BulletinModerateGearboxNA

Bulletin

JERKING OR SHUDDERING FROM THE DRIVELINE (XDRIVE TRANSFER CASE ATX13-X): There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages. CAUSE Unevenly worn or incorrect fitment tires are installed on the vehicle or the factory-filled transfer case oil does not meet BMW specifications.

NHTSA · manufacturer bulletin10176367Model years 2020View details →
Older →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).