Motor vehicles - bodywork (occupant protection devices)
The rear left and/or rear right seat belts may not have been manufactured correctly.
🔔 Create a free account to get email alerts about BMW X2 (all generations)
The rear left and/or rear right seat belts may not have been manufactured correctly.
BMW of North America, LLC is recalling certain 2026 2 Series Gran Coupe, X1, X2, and Mini Countryman S ALL4 vehicles. The housing pin in the rear (left and/or right) seat belt retractors may have been damaged during production, resulting in the retractor not locking the seat belt as intended. As such, these vehicles fail to comply to Federal Motor Vehicle Safety Standard number 209, "Seat Belt Assemblies."
The front seat belt(s) may not have been manufactured correctly.
The propellant in the driver's airbag can deteriorate over time. If the airbags deploy, this could cause fragments of the inflator to injure the vehicle's occupants.
The brake system may have a poor weld seam and could fail under high brake pressure, causing the brake booster to cut out.
BMW of North America (BMW) is recalling certain 2023-2024 X1, 2024-2025 X5, 2025 X6, 2023-2025 X7, 740i, 760i, 2024 XM, 530i, 540i, i7, 750e, X2, 2024-2025 i5, 2024 Rolls Royce Spectre, 2025 MINI Countryman S ALL4, JCW Countryman ALL4, and 2025 MINI Hardtop 2 Door (Cooper, Cooper S) vehicles. Please refer to the recall report for the complete list of models. The welds in the servomotor of the integrated brake control module may break, causing a loss of power brake assist and rear brake function. In addition, the Antilock Brake System (ABS) and Dynamic Stability Control (DSC) system may not function.
Het frame van de stoelverstelling is mogelijk niet goed gelast.
Le micro générateur de gaz à l’intérieur du rétracteur de ceinture de sécurité n’a peut-être pas été fabriqué selon les spécifications. cela peut entraîner une altération de la fonction de retenue en cas d’accident, ce qui augmente le risque de blessure. en outre, il peut y avoir formation d’étincelles en cas de libération de pression à l’extérieur du tube endommagé par le gonfleur, ce qui augmente le risque d’incendie.
Des défauts dans l’enroulement des feuilles internes cellulaires dans les batteries haute tension peuvent entraîner l’apparition d’une augmentation de l’autodécharge. cela peut entraîner une surchauffe des modules de cellules haute tension, ce qui augmente le risque d’incendie.
De hoogvoltaccu bevat mogelijk een fout bij het wikkelen van celinterne folies.
Defects in the winding of cell-internal foils in the high-voltage batteries can lead to the occurrence of increased self-discharge. This can cause high voltage cell modules to overheat, increasing the risk of fire.
The micro gas generator inside the seat belt retractor may not have been manufactured to specifications. This may lead to an impairment of the restraint function in case of an accident, increasing the risk of injury. Moreover, there may be spark formation in case of a pressure release outside of the inflator damaged tube, increasing the risk of fire.
De gordelspanner werkt mogelijk niet bij een ongeval en er is kans op vonkvorming als de gordelspanner wordt geactiveerd.
Un court-circuit dans la batterie haute tension pourrait se produire lors du chargement initial en raison d’une particule sous la forme d’une perle de soudage. cela peut déclencher une réaction en chaîne dans la batterie, ce qui augmente le risque d’incendie.
Un capteur de détection de renversement à l’intérieur de l’unité de commande du coussin gonflable peut être défectueux. par conséquent, en cas d’accident dans lequel le véhicule bascule au-dessus de son toit, l’airbag risque de ne pas se déployer correctement, augmentant ainsi le risque de blessures des passagers.
BMW of North America, LLC (BMW) is recalling certain 2021 2 Series (230i, 230i xDrive, M240i, M240i xDrive), 330e, 330e Xdrive, 4 Series Coupe (430i, 430i xDrive, M440i xDrive) M4 Coupe, M4 Competition Coupe, BMW 4 Series Convertible (430i, M440i), BMW X1 sDrive28i, xDrive28i, 2 Series Gran Coupe (228i, 228i xDrive, M235i xDrive), M2 Competition Coupe, 330i, 330i xDrive, M340i, M340i xDrive, M3, M3 Competition, 530i, 530i xDrive, 540i, 540i xDrive, MINI Hardtop 2 Door (Cooper, CooperS, JCW), X2 sDrive28i, X2 xDrive28i, X2 M35i, Z4 sDrive30i, Z4 M40i, MINI Hardtop 2 Door (Cooper SE), MINI Convertible (Cooper, Cooper S, JCW), MINI Clubman (Cooper S, Cooper S All4, JCW), MINI Countryman (Cooper, Cooper All4, Cooper S, Cooper S All4, JCW All4), Rolls Royce Ghost, MINI Countryman (Cooper S E All4), Rolls Royce Phantom, Rolls Royce Cullinan, and Toyota Supra vehicles. The passenger seat belt Automatic Locking Retractor (ALR) may deactivate early, before the webbing fully retracts. As such, these assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
De HV accucellen hebben mogelijk een productiefout.
De las verbinding van de HV accucellen is mogelijk niet juist gelast.
A short circuit in the high-voltage battery could occur during initial charging due to a particle in the form of a welding bead. This may trigger a chain reaction in the battery, increasing the risk of fire.
A rollover detection sensor inside the airbag control unit might be defective. Consequently, in the event of an accident in which the vehicle tips over its roof, the airbag might not properly deploy, increasing the risk of injuries of the passengers.
A spherical-collar disk is missing on the tie rod end of the steering gear. Consequently, the steering gear might break due to excessive wear, leading to a loss of steering control, increasing the risk of accident.
On certain vehicles, a crankshaft sensor error may cause the engine to stall. This would result in a loss of motive power, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the crankshaft sensor. Note: This condition would result in the illumination of the check engine warning lamp and an “engine malfunction” message appearing in the instrument cluster. Note: This is an expansion of recall 2018-373.
The hollow shaft of the brake booster was not welded correctly. The weld may be unable to withstand the build-up of high brake pressure and may break. In this case, reduced braking performance requires greater force, and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident.
Issue: On certain vehicles, the recall repairs completed by a BMW dealer during Transport Canada recall number 2024-456 may not have been done correctly. As a result, another repair is required. On certain vehicles, a problem with the integrated brake system could cause reduced power brake assist. As a result, there may be reduced braking, and the antilock braking system (ABS) and dynamic stability control (DSC) may not work. Safety Risk: Reduced braking can cause extended stopping distances and could increase the risk of a crash. Additionally, antilock brakes and stability control systems that don't work could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the integrated brake system.
BMW of North America, LLC (BMW) is recalling certain 2025 Mini Cooper S, Mini Countryman S All4, X2, 2024 Rolls-Royce Spectre, 2023-2025 i7, 7 Series, X7, 2024-2025 i5, 5 Series, 2023-2024 XM, X1, 2024-2025 X6, and X5 vehicles. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).