Motor vehicles and trailers - braking system
The brake system may have a poor weld seam and could fail under high brake pressure, causing the brake booster to cut out.
🔔 Create a free account to get email alerts about BMW XM (all generations)
The brake system may have a poor weld seam and could fail under high brake pressure, causing the brake booster to cut out.
BMW of North America (BMW) is recalling certain 2023-2024 X1, 2024-2025 X5, 2025 X6, 2023-2025 X7, 740i, 760i, 2024 XM, 530i, 540i, i7, 750e, X2, 2024-2025 i5, 2024 Rolls Royce Spectre, 2025 MINI Countryman S ALL4, JCW Countryman ALL4, and 2025 MINI Hardtop 2 Door (Cooper, Cooper S) vehicles. Please refer to the recall report for the complete list of models. The welds in the servomotor of the integrated brake control module may break, causing a loss of power brake assist and rear brake function. In addition, the Antilock Brake System (ABS) and Dynamic Stability Control (DSC) system may not function.
Het waarschuwingssysteem voor het niet dragen van de veiligheidsgordel werkt nmogelijk niet.
BMW of North America, LLC (BMW) is recalling certain 2024 XM, 2025 BMW X5 sDrive40i, X5 xDrive40i, X5 M60i, X5 M, X5 xDrive50e, X6 xDrive40i, X6 M60i, X6 M, X7 xDrive40i, X7 M60i, and Alpina XB7 vehicles. The seat belt system may inaccurately detect that passengers are belted, preventing the seat belt warning light from illuminating and possibly causing the supplemental restraint system to not deploy as intended during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
De bovenste achterklepafdekking is niet goed bevestigd en deze kan loskomen van het voertuig.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants.
BMW of North America, LLC (BMW) is recalling certain 2023 BMW XM, 2024 BMW X5 sDrive40i, X5 xDrive40i, X5 M60i, X5 M, X5 xDrive50e, X6 xDrive40i, X6 M60i, X6 M, X7 xDrive40i, X7 M60i, and Alpina XB7 vehicles. The front passenger knee air bag may not deploy as intended.
BMW of North America, LLC (BMW) is recalling certain 2024 X5 sDrive40i, X5 xDrive40i, X5 M60i, X5 M, xDrive 50e, 2024 X6 xDrive40i, X6 M60i, X6 M, 2024 X7 xDrive40i, X7 M60i, Alpina XB7, and 2023 XM vehicles. The knee air bag (driver and/or passenger) may not have been manufactured correctly, which can result in the knee air bag not deploying as intended.
촉매변환기와 미립자 필터 연결부의 고정 너트가 부정확하게 조여져 배기가스가 누설될 수 있으며, 배기가스가 누설될 경우 극히 드물게 엔진 구성품에 화재가 발생할 수 있는 가능성에 따른 리콜
BMW of North America, LLC (BMW) is recalling certain 2023 X7 M60i and XM vehicles. The fasteners that connect the exhaust system and the catalytic converter may not have been tightened correctly.
The hollow shaft of the brake booster was not welded correctly. The weld may be unable to withstand the build-up of high brake pressure and may break. In this case, reduced braking performance requires greater force, and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident.
BMW of North America, LLC (BMW) is recalling certain 2025 Mini Cooper S, Mini Countryman S All4, X2, 2024 Rolls-Royce Spectre, 2023-2025 i7, 7 Series, X7, 2024-2025 i5, 5 Series, 2023-2024 XM, X1, 2024-2025 X6, and X5 vehicles. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
The integrated braking system could be compromised, which could lead to unexpected failure of the hydraulic brake assist, requiring greater pressure on the brake pedal. This may result in a longer braking distance, as well as a failure of the anti-lock braking system (ABS) and the dynamic stability control (DSC), thereby increasing the risk of an accident.
Le panneau de la garniture du hayon peut ne pas être correctement fixé au véhicule et tomber, ce qui crée un risque d’accidents et de blessures pour les autres usagers de la route.
フロントアクティブスタビライザーにおいて、製造工程が不適切なため、十分な焼き入れ処理がされていないものがある。また、腐食防止処理が不適切なため、局所的に腐食しているものがある。そのため、走行中の振動等により内部に亀裂が入り、そのまま使用を続けると、フロントアクティブスタビライザーが破断するおそれがある。
On affected vehicles the brake servomotor was improperly welded. The weld seam might not withstand the stresses caused under high brake pressure leading to a requirement for a higher brake effort increasing the braking distance.
In het remsysteem ontbreekt software om fouten te detecteren, waardoor er geen waarschuwing op het informatiedisplay verschijnt bij een storing.
BMW of North America, LLC. (BMW) is recalling certain 2023-2024 X1, X5, X6, X7, XM, 530i, i5, 740i, 760i, i7, and 750e vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
On certain vehicles the Integrated Brake (IB) system may be impaired due to contamination between electrical contacts.
Issue: On certain vehicles, a problem with the integrated brake system could cause reduced power brake assist. As a result, there may be reduced braking and the antilock braking system (ABS) and dynamic stability control (DSC) may not work. Note: This recall replaces Transport Canada recall no. 2024-087. Safety Risk: Reduced braking can cause extended stopping distances and could increase the risk of a crash. Additionally, antilock brake and stability control systems that don't work could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the integrated brake system.
엔진제어장치의 소프트웨어 오류로 인해 VVL 관련 자기 진단에 의한 MIL 점등이 불가하여, 자기진단장치를 통한 정상적인 배출가스 감시를 방해할 수 있음에 따른 리콜 <대상차량별 생산일자는 상이할 수 있으므로, 자세한 사항은 제작사 고객센터(080-269-5181)로 문의 하여 주시기 바랍니다.>
On affected vehicles the hall sensor in the driver and passenger front seat belt stalks may not have been correctly installed and it may indicate the seat belt is inserted correctly when it actually is not.
테일게이트의 내부 브라켓과 외판 접착을 위한 표면처리(프라이머 도포) 과정에서 표면처리 후 건조시간이 초과하였거나, 프라이머 도포 시 전체적으로 도포되지 않는 공정 오류가 발생하였을 수 있으며, 이런 경우 테일게이트 외판 접착력이 저하되어 차량 주행 중 소음이 발생되고, 테일게이트 외판이 내부 브라켓에서 분리될 수 있음. 차량 주행 중 테일게이트 외판이 완전히 분리될 경우, 후행 차량에 위험상황이 발생되고, 사고의 위험성이 확인됨에 따른 리콜
On affected vehicles an unexpected loss of hydraulic brake assistance may occur and may result in a different pedal behaviour under specific conditions an extended braking distance may be experienced and ABS/Stability control may be impaired
BMW of North America, LLC (BMW) is recalling certain 2024 XM vehicles. The tailgate panel may detach from the mounting structure due to improper adhesive bonding that occurred during manufacturing.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).