Motor vehicles - bodywork (occupant protective equipment)
The gas generator in the driver's airbag may burst.
🔔 Create a free account to get email alerts about BMW X5
The gas generator in the driver's airbag may burst.
The driver's airbag gas generator may malfunction if it has been exposed to high absolute humidity and high temperature fluctuations over the years
Due to the steering wheel upgrade, some vehicles may be equipped with a driver airbag featuring an inflator that could rupture when the airbag deploys if it has been exposed to repeated cycles of humidity and heat over time.
Les substances chimiques présentes dans les gonfleurs des airbags takata psdi4 peuvent se détériorer avec le temps, en particulier dans les climats chauds et humides. cela pourrait provoquer la rupture de l'airbag avec trop de force en cas d'accident, ce qui pourrait entraîner des blessures graves, voire mortelles, dans le pire des cas.
Affected vehicles are already included in Safety Recalls within the markets they have previously resided in. The vehicles may be fitted with a driver and/or passenger airbag/s which if deployed may do so with excessive force causing sharp metal fragments to be released this may cause serious injury which could prove fatal to people in the vicinity.
It is possible that a different steering wheel with an airbag was fitted afterwards, whose gas in the gas generator may degrade over time.
Issue: This recall applies to vehicles that may be equipped with a replacement sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: To reduce the safety risk, BMW advises you not to drive the vehicle until the recall repairs have been completed. BMW will notify owners by mail and advise you to contact a dealership to arrange for an inspection and, if necessary, replacement of the driver-front airbag module. To learn if your vehicle is affected by this recall, owners may: • Visit <a href= https://www.bmw.ca/en/ssl/VehicleRecall.html> https://www.bmw.ca/en/ssl/VehicleRecall.html</a> • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
BMW of North America, LLC (BMW) is recalling certain 2000-2001 X5 vehicles that may be equipped with a sport steering wheel containing a Takata PSDI-4 air bag inflator. The inflator may explode during deployment due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature, and temperature cycling.
Le propulseur dans l'airbag du conducteur peut se détériorer avec le temps. si les airbags se déploient, des fragments du gonfleur pourraient blesser les occupants du véhicule.
블로우바이히터의 생산 품질 불량으로 플라스틱 코팅이 단락 열에 의해 녹아 매우 드문 경우 화재가 발생할 수 있는 가능성에 따른 리콜 (*다만 단락이 발생될 경우 엔진경고등(MIL)이 점등되며 이러한 경우, 냄새 또는 연기를 통해 운전자가 이 사실을 바르게 인지할 수 있음) <*대상차량별 생산일자> BMW 128i: 2008.09.25 BMW 128i: 2008.03.17~2008.07.11 BMW 128i: 2008.02.04~2009.06.23 BMW 128i: 2010.09.03~2012.03.02 BMW 128i: 2010.04.26 BMW 323i: 2009.04.17 BMW 323i: 2006.09.04 BMW 325i: 2004.12.15~2007.01.22 BMW 325i: 2005.05.04~2006.08.17 BMW 325i: 2005.09.15~2006.05.10 BMW 325xi: 2005.11.22~2006.05.23 BMW 325xi: 2005.07.14 BMW 328i: 2011.07.04~2012.11.12 BMW 328i: 2010.10.18~2011.03.14 BMW 328i: 2010.11.18~2012.08.28 BMW 328i: 2011.02.14~2011.09.23 BMW 328i: 2008.09.02~2009.04.30 BMW 328i: 2008.09.16~2008.10.22 BMW 328i: 2009.04.07~2011.07.25 BMW 328i: 2009.02.13~2009.05.21 BMW 328i: 2010.07.08~2011.10.14 BMW 328i: 2009.09.21~2010.10.05 BMW 328i: 2008.08.21~2008.11.13 BMW 328i: 2009.02.16 BMW 328i: 2009.09.24~2011.07.25 BMW 328i: 2009.10.07~2010.09.27 BMW 328i: 2006.08.24~2008.02.20 BMW 328i: 2006.09.02~2008.07.29 BMW 328i: 2006.10.30~2008.06.13 BMW 328i: 2006.09.11~2008.04.03 BMW 328i: 2008.07.02 BMW 328i: 2006.06.26~2009.01.20 BMW 328i: 2007.05.30~2009.07.29 BMW 328i: 2007.03.24~2009.04.27BMW 328i: 2009.10.08~2009.12.01 BMW 328i: 2006.11.15~2009.07.24 BMW 328i: 2009.11.03 BMW 328i Convertible: 2009.12.08~2013.07.24 BMW 328i Convertible: 2006.12.12~2010.01.20 BMW 328i xDrive: 2010.06.18 BMW 328xi: 2009.07.24 BMW 328xi: 2009.09.08~2010.10.08 BMW 328xi: 2011.10.06~2011.12.05 BMW 328xi: 2008.10.31~2009.07.24 BMW 328xi: 2009.10.16~2011.08.02 BMW 328xi: 2008.10.15 BMW 328xi: 2006.10.11~2007.12.12 BMW 328xi: 2006.09.11~2007.09.24 BMW 328xi: 2006.10.23~2009.01.22 BMW 328xi: 2006.09.28~2009.01.28 BMW 328xi: 2009.09.14 BMW 330i: 2004.11.24~2006.07.06 BMW 330i: 2005.03.04~2006.06.14BMW 330xi: 2005.10.26~2006.06.02 BMW 523i: 2005.02.18~2007.02.23 BMW 525i: 2005.03.18~2006.10.04 BMW 525i: 2005.03.07~2006.12.07 BMW 525xi: 2005.07.28~2006.06.26 BMW 528i: 2007.02.21~2009.12.17 BMW 528i: 2007.03.26~2009.01.29 BMW 528i: 2009.07.01~2009.11.26 BMW 528xi: 2007.04.23~2008.11.24 BMW 528xi: 2009.04.14~2009.11.09 BMW 530i: 2005.03.17~2006.12.20 BMW 530i: 2005.03.14~2007.02.22 BMW 530i: 2005.06.17~2006.11.02 BMW 530i: 2007.02.21~2009.09.23 BMW 530xi: 2006.03.08~2006.12.20 BMW 530xi: 2005.07.06 BMW 730i: 2005.03.11~2006.09.21 BMW 730Li: 2005.03.11~2007.03.05 BMW X3 3.0i: 2006.09.05~2007.03.27 BMW X3 3.0i: 2007.07.16~2007.09.07 BMW X3 3.0si: 2007.01.23~2007.04.16 BMW X3 3.0si: 2006.08.29~2009.03.02 BMW X3 3.0si: 2009.09.01~2010.01.13 BMW X5 3.0si: 2007.03.23~2010.02.23 BMW X5 3.0si: 2007.02.10~2009.07.22 BMW X5 3.0si: 2009.12.03~2010.01.21 BMW X5 xDrive30i: 2007.02.02~2008.08.04 BMW X5 xDrive30i: 2009.10.12 BMW xDrive30: 2006.10.11~2009.06.02 BMW xDrive30: 2009.10.01~2009.11.30 BMW Z4 3.0i: 2006.03.01~2008.07.16 BMW Z4 3.0si: 2006.01.11~2007.06.14 BMW Z4 3.0si: 2006.03.10~2006.09.19 BMW Z4 3.0si: 2006.07.25~2008.03.14 BMW Z4 3.0si Coupe: 2006.07.05~2007.06.28 BMW Z4 sDrive: 2010.09.17~2011.06.07 BMW Z4 sDrive30i: 2009.04.22~2011.07.29 ?
Due to improper plastic manufacturing of the blow-by heater, irregularities may occur in the insulator of the positive temperature coefficient (PTC) heater element, and over time the PTC heater element may short-circuit, but it is not reliably protected by the fuse. As a result, the PTC heater element may overheat abnormally, melting the outer casing, illuminating the engine warning light, and, in the worst case, leading to a fire.
運転席用エアバッグのインフレータ(膨張装置)の補給用部品において、ガス発生剤の吸湿防止が不適切なものがある。そのため、車両の修理時に当該インフレータに交換し、そのままの状態で使用を続けると、高い湿度の環境下で大きな温度変化の繰り返しによりガス発生剤が劣化し、エアバッグ展開時にインフレータ容器が破損するおそれがある。
Due to ageing effects in the driver's airbag gas generator, excessive pressure may occur when activated.
생산공정상 문제로 인한 블로우바이히터 생산 불량으로 엔진 경고등이 점등되며 극히 드문 경우 블로우바이히터가 가열되어 녹는 경우 화재가 발생할 수 있는 가능성에 따른 리콜 <*대상차량별 생산일자> 128i: 2008.03.27~2008.05.19 323i: 2009.04.17 323i: 2005.10.26 323i: 2006.09.04~2007.11.14 325i: 2004.12.15~2005.12.20 325i: 2005.04.27~2006.08.17 325i: 2005.09.15~2006.05.10 325xi: 2005.11.22~2006.08.28 328i: 2008.08.21 328i: 2006.09.16 328i: 2006.06.26~2007.11.12 328i: 2007.05.30 328xi: 2009.10.16~2011.05.13 328xi: 2006.09.05~2006.12.08 328xi: 2009.01.22 330i: 2004.11.24~2005.12.17 330i: 2005.03.04~2006.05.16 330xi: 2005.10.26~2006.06.02 523i: 2005.02.18~2005.12.20 525i: 2005.03.18~2005.12.21 525i: 2005.03.07~2006.06.24 525xi: 2005.07.28~2005.12.21 528xi: 2009.09.04~2009.11.09 530i: 2005.03.17~2005.12.21 530i: 2005.04.01 530i: 2005.03.14~2006.03.13 530i: 2005.06.17~2006.11.02 530xi: 2005.07.06 730i: 2005.03.11~2005.12.08 730Li: 2005.03.11~2005.12.13 X3 3.0i: 2007.07.16~2007.09.07 X3 3.0i: 2011.03.09~2011.06.30 X3 3.0si: 2006.09.17 X5 xDrive30i: 2007.02.02~2008.08.04 X5 xDrive30i: 2009.10.12 Z4 3.0i: 2006.03.01~2006.07.19 Z4 3.0si: 2006.03.30~2006.09.19 Z4 3.0si: 2006.07.25 528i: 2008.05.13
The front drivers air bag may not deploy correctly on activation.
Issue: 2023 Update - BMW has updated this recall and issued a do not drive advisory for all vehicles that that not yet been repaired. Some vehicles may contain a replacement sport steering wheel with a Takata driver-front air bag module. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW advises not to drive your vehicle unless this recall repair has been completed. BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. To learn if your vehicle requires repair, owners may: • Visit https://www.bmw.ca/en/ssl/VehicleRecall.html • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
BMW of North America, LLC (BMW) is recalling certain model year 2000-2003 525i Sedan, 530i Sedan, 540i Sedan, 2001-2003 525i Sports Wagon and 540i Sports Wagon vehicles, and 2000-2004 X5 SAV 3.0i, X5 SAV 4.4i, and X5 SAV 4.6is vehicles. This recall affects certain vehicles where the original steering wheel has been replaced with the optional sports steering wheel. The sports steering wheel has a frontal air bag inflator that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
The software of the airbag control device has been incorrectly programmed. As a consequence, simultaneously switching off the engine and applying the handbrake may unintentionally activate the frontal airbag.
エンジンのブローバイガス還元装置において、ブローバイガスヒーターの成形加工が不適切なため、外装樹脂にクラックが発生するものがある。そのため、クラックに水分が浸入すると、クラックが拡大し樹脂内部にある電熱線ヒーターの回路が短絡して警告灯が点灯し、そのまま使用を続けると、ヒーターが異常発熱して外装が溶け、最悪の場合、火災に至るおそれがある。
블로우바이히터가 가열되어 녹는 경우 엔진경고등이 점등되며, 극히 드문 경우 화재가 발생할 가능성이 발견 됨에 따른 리콜 128i: 2008.04.10~2010.09.03 325i: 2006.07.06~2006.08.09 328i: 2006.08.24~2011.09.12 328i Convertible: 2006.12.12~2011.08.19 328xi: 2006.10.27~2011.10.06 330i: 2006.07.06 523i: 2006.05.23~2011.08.12 525i: 2006.03.02~2009.12.17 525xi: 2006.07.04~2006.09.06 528i: 2007.02.21~2011.08.10 528xi: 2007.05.30~2009.01.12 530i: 2006.02.28~2009.09.23 530xi: 2006.08.31~2006.10.27 730i: 2006.06.01~2006.09.21 730Li: 2006.05.23~2007.03.05 X3 3.0i: 2006.09.05~2007.03.27 X3 3.0si: 2007.01.23~2010.07.09 X5 3.0i: 2007.03.23~2010.02.23 X5 3.0si: 2007.02.09~2009.07.22 Z4 3.0si: 2006.05.31~2008.03.14 Z4 sDrive30i: 2009.04.22~2011.07.29
The replacement parts for driver-side airbag inflators (gas generator units) include some in which moisture protection of the gas generant is inadequate. Therefore, if such an inflator is installed during vehicle repair and continues to be used as is, the gas generant may deteriorate under high humidity and repeated large temperature changes, and the inflator housing may rupture when the airbag deploys.
null If the driver's airbag is deployed, the inflator might burst if it was subject to high air humidity, high temperatures and substantial temperature fluctuations over a number of years. This may result in the ejection of metal parts, which could cause injury or death to the driver and the passengers.
Due to a defect in the driver's airbag gas generator, it can go off uncontrollably in the event of a collision. Metal parts can be released and shot towards the occupants.
Issue: 2023 Update - BMW has updated this recall and issued a do not drive advisory for all vehicles that that not yet been repaired. This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW advises not to drive your vehicle unless this recall repair has been completed. BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. To learn if your vehicle requires repair, owners may: • Visit https://www.bmw.ca/en/ssl/VehicleRecall.html • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).