Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of fmvss no. 209, "seat belt assemblies." the front seat belt retractor may not comply with the requirements of the standard.
NHTSA · United StatesApr 11, 200101V119000Model years 1999View details →
On certain vehicles, the passenger side air bag inflator assembly contains an incorrect inflator charge. This condition could increase the risk of a passenger occupant injury in the event of a crash. Correction: Passenger air bag modules will be replaced.
Transport CanadaJan 14, 20002000013Model years 2000View details →
Note: Vehicles equipped with 3.5 litre engine. The fuel injection delivery system may leak fuel from some of the sealing "o-rings" or from hairline cracks in the thermoplastic fuel injection rail. In the presence of an ignition source such a condition could result in a fire. Correction: The nitrile rubber "o-rings" will be replaced with "o-rings" made of an improved material. The fuel rail will also be evaluated and replaced as required.
Transport CanadaAug 26, 19981998167Model years 1993–1997View details →
Vehicle description: Passenger vehicles built with 3.5l engines. The fuel injection delivery system can leak fuel from some of the sealing o-rings or from hair line cracks in the thermoset fuel injection rail.
NHTSA · United StatesAug 6, 199898V184000Model years 1993–1997View details →
The "nitrile" rubber compound "o-rings" used to seal the interface of the fuel injector rail supply, return and cross over tubes may degrade and allow fuel to leak into the engine compartment. This could result in an engine compartment fire. Correction: The engine fuel rail will be replaced with a rail that contains the 1994 style fluorocarbon ""o-rings" at the fuel supply, return and cross over tubes.
Transport CanadaJun 22, 19981998125Model years 1993View details →
Vehicle description: Passenger vehicles built with 3.3l engines. The 'o-rings' used to seal the interface of the fuel injector rail supply, return and cross over tubes are not as robust as those used in later model years. Deterioration of the 'o-rings' can cause fuel leakage.
NHTSA · United StatesJun 12, 199898V130000Model years 1993View details →
On certain passenger vehicles, the floor shifter ignition-park interlock may fail and allow the shifter to be moved out of the park position with the key removed. An inoperative interlock may also allow the key to be removed when the shifter has not been placed in the park position.
NHTSA · United StatesJan 13, 200404V021000Model years 1993–1999View details →
On certain passenger vehicles, an internal hood latch component may have been manufactured with a crack, which could propagate and break, allowing the primary/secondary latch spring to disengage.
NHTSA · United StatesSep 8, 200303V332000Model years 2004View details →
Vehicle description: Certain passenger vehicles (non-sunroof only) fail to comply with the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact."
NHTSA · United StatesAug 2, 200101V273000Model years 2000–2001View details →
Vehicle description: Non-abs equipped passenger vehicles. The brake master cylinder piston retainer snap ring may have been bent inward during the assembly process. The master cylinder piston may be in a "brake applied" position due to the damaged piston retainer snap ring. When the piston is in the applied position, the fluid compensation ports are closed which results in a brake drag condition.
NHTSA · United StatesJul 10, 200000V180000Model years 2000View details →
Vehicle description: Passenger vehicles. The molding flash on the primary lever may prevent the operation of the g-lock and tilt lock functions on some of the driver's side retractors.
NHTSA · United StatesFeb 4, 200000V033000Model years 2000View details →
The right side steering tie rod may rub against the automatic transmission wiring harness insulation resulting in a short circuit. This could cause electrical system malfunctions, including engine die out and an inoperative park/starter interlock system. Correction: A revised wiring harness bracket and plastic convolute sleeve will be installed to protect the transmission wiring harness.
Transport CanadaFeb 21, 19941994037Model years 1994View details →
The right steering tie rod can rub through the automatic transmission wiring harness causing a short circuit which results in electrical system malfunctions including engine stalling and an inoperative park/starter interlock system.
NHTSA · United StatesFeb 8, 199494V024000Model years 1994View details →
Vehicle description: Certain passenger vehicles, pickup trucks and sport utility vehicles fail to comply with the requirements of fmvss no. 225, "child restraint anchorage systems." some of the owner's manuals for these vehicles are missing instructions that provide a step-by-step procedure, including diagrams, for properly attaching a child restraint system's tether strap to the tether anchorage.
NHTSA · United StatesNov 9, 200000V366000Model years 2000–2001View details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).