Free to read · free account to contributeSuccessor to Anticars (2000)

Chrysler Sebring II

2000–2006 · 9 documented defects · 2 markets

This file gathers the known defects of the Chrysler Sebring II, written and sourced by the community. Anyone can read; a free account lets you contribute. A defect earns the seal once enough reputable contributors have validated it.

Owners often report problems with engine and cooling on this car (342 complaints), but no one has explained the cause yet. Do you know it?Write it up
Owners often report problems with airbags on this car (195 complaints), but no one has explained the cause yet. Do you know it?Write it up

Most serious reported defects

See all (9) →
m
CriticalInteriorNA

Airbags: problems reported by owners

195 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2001–2005), typically at around 60,000 miles. Most often named: frontal (21%). Reported consequences: 52 crashes, 4 fires, 46 injuries.

✓ Mecafile analysis of official data2001–2005View details →
m
CriticalElectricalNA

Electrical system: problems reported by owners

136 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2001–2005), typically at around 72,000 miles. Reported consequences: 4 crashes, 10 fires, 2 injuries, 2 deaths.

✓ Mecafile analysis of official data2001–2005View details →
m
CriticalSuspensionNA

Steering: problems reported by owners

80 owners in the United States reported problems with the steering of this car to NHTSA (model years 2001–2005), typically at around 74,000 miles. Reported consequences: 7 crashes, 1 fire, 5 injuries, 1 death.

✓ Mecafile analysis of official data2001–2005View details →

Latest official recalls

See all (18) →
RecallCriticalInteriorNA

Airbag

On certain two-door coupe vehicles, in the event of a collision that warrants a deployment of the front passenger airbag, the deploying airbag could strike the passenger sun visor if it is in the down position. This could cause the sun visor to detach from its mounting bracket, potentially contacting an occupant, which would increase the risk of injury. Correction: Dealers will add a tether strap to the passenger sun visor. Note: This is an expansion of recall 2015267.

Transport CanadaJun 29, 20162016338Model years 2001View details →
RecallCriticalInteriorNA

Air bags:Frontal:Passenger side:Inflator module

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2001-2002 Chrysler Sebring and Dodge Stratus vehicles, equipped with beige interiors. The affected vehicles were previously repaired for a recall issue using an incorrect part. The incorrect part may not prevent the passenger side sun visor from detaching if the passenger frontal air bag deploys and the passenger side sun visor is folded down in a certain position.

NHTSA · United StatesJun 3, 201616V401000Model years 2001–2002View details →

Latest service bulletins

See all (84) →
BulletinMinorElectricalNA

Bulletin

Security Module Lock Out After Entering the PIN to Unlock The Wireless Control Module (WCM)

NHTSA · manufacturer bulletin10230298Model years 2004View details →
BulletinMinorElectricalNA

Bulletin

Security Module Lock Out After Entering the PIN to Unlock The Wireless Control Module (WCM)

NHTSA · manufacturer bulletin10223762Model years 2004View details →
BulletinMinorGearboxNA

Bulletin

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

NHTSA · manufacturer bulletin10220840Model years 2005View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0).