The trademark logo may not have been applied correctly.
The trademark logo may not have been correctly affixed. As a result, it may come loose if an airbag deploys and be projected into the passenger compartment, causing injuries to the occupants.
🔔 Create a free account to get email alerts about Chrysler Voyager IV
This file gathers the known defects of the Chrysler Voyager IV, written and sourced by the community. Anyone can read; a free account lets you contribute. A defect earns the seal once enough reputable contributors have validated it.
The trademark logo may not have been correctly affixed. As a result, it may come loose if an airbag deploys and be projected into the passenger compartment, causing injuries to the occupants.
The recall is due to a defective nut that secures the emblem mounted on the driver's airbag cover. When the airbag deploys, the loosened emblem or the nut fixing the emblem may fly out and could injure the driver. <Production dates of affected vehicles> Grand Voyager: October 31, 2007 to August 18, 2010 Nitro: January 27, 2007 to May 29, 2008
탑승자 보호 장치 모듈 내 전원 공급 집적 회로의 부식으로 인해 오작동이 발생할 수 있음. 이로 인해 에어백이 전개되어야 할 사고 발생 시 에어백 경고등은 점등되지만 에어백이 전개되지 않거나, 에어백 경고등이 점등되지 않은 상태에서 의도치 않게 에어백이 전개됨으로 인해 충돌 사고 시 앞좌석 탑승자의 부상 위험이 증가함에 따른 리콜.
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
Shift quality improvements or torque converter shudder with coordinated change. *kb
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).