Free to read · free account to contributeSuccessor to Anticars (2000)

Citroën C1

2005–2022 · 2 generations · 15 documented defects · 2 markets
Generations
Model year
MarketAllEUJPUK
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014
RecallCriticalEngineUK

Possibility of fuel leak

It has been identified that during the fuel tank production process the joint between the tank and the fuel supply pipe assembly may not have been produced to the correct standard. Should this indeed be the case leakage from the supply pipe area of the fuel tank might occur.

DVSA · United KingdomNov 7, 2007R/2007/165Model years 2007View details →
C1 II (AB40) · 2014–2022
RecallModerateInteriorEU

The stitching of the rear seat belt loops could be defective

The stitching of the rear seat belt loops may be defective. This will affect the protective function of the seat belt, which will increase the risk of injury in the event of an accident.

EU Safety Gate · RappelConso · FranceAug 19, 2021a12/00103/21Model years 2020Auto-translated · original: FrenchView details →
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
RecallModerateSuspensionJP

かじ取ギヤボックス

ステアリングコラムシャフトとステアリングギアボックスを接続するボルトの取付けが不適切なため、当該取付部の結合力が不足しているものがある。そのため、かじ取り操作等により当該取付部が分離して、最悪の場合、かじ取り操作ができなくなるおそれがある。

MLIT · JapanJan 11, 20191227720Model years 2018Shown in the original Japanese · translation pendingView details →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
RecallModerateSuspensionUK

Steering column may fail unexpectedly

A component of the steering column may not be to specification and could fail. If this occurs there would be a loss of directional control.

DVSA · United KingdomJun 27, 2016R/2016/136Model years 2014View details →
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014
RecallModerateBrakesUK

Loss of control

The front shock absorber rod may have an internal fault which could cause it to brake. This could have an adverse affect on the front suspension and the driver's ability to control the vehicle.

DVSA · United KingdomDec 19, 2014R/2014/173Model years 2013View details →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
RecallModerateSuspensionUK

Rear cross-member may fail and cause driver to lose control

On subject vehicles a weld on the rear cross member might be non-compliant and eventually cause the weld between the cross member and the vehicle body to break. This may lead to a partial detachment of the axle and cause the driver to lose control.

DVSA · United KingdomFeb 25, 2014R/2014/028Model years 2013View details →
C1 I (PM/PN) · 2005–2014
RecallModerateEngineUK

Engine may fail

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

DVSA · United KingdomNov 14, 2012R/2012/129Model years 2010View details →
C1 I (PM/PN) · 2005–2014
RecallModerateSuspensionUK

Suspension may fail

The left hand side front chassis may have a nonconformity which may lead to a risk of poor securing of the suspension arm.

DVSA · United KingdomJun 20, 2011R/2011/070Model years 2011View details →
C1 I (PM/PN) · 2005–2014
RecallModerateEngineUK

Engine may fail

Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.

DVSA · United KingdomNov 5, 2010R/2010/192Model years 2010View details →
C1 II (AB40) · 2014–2022
RecallModerateOtherUK

Accelerator pedal may fail to return to idle

It has been identified that within the mechanism of the accelerator pedal there is a friction lever which interacts with a sliding surface. Over time and under certain conditionsthe contact surfaces may generated excessive friction and latterly the movement of the accelerator pedal. This over time and under certain conditions will result in the accelerator pedal becoming intermittently more difficult to push; or slower to return. In rare instances the accelerator pedal can remain in the partially depressed position.

DVSA · United KingdomFeb 19, 2010R/2010/012View details →
C1 I (PM/PN) · 2005–2014
RecallModerateSuspensionUK

Wheel studs may become loose

A possible substandard tapping of one or more of the wheel stud holes may result in a reduction of the wheel stud to hub torque setting.

DVSA · United KingdomJul 28, 2009R/2009/075Model years 2009View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).