Motorrijtuigen en aanhangwagens - elektrische installatie
De voedingsaansluiting van de startmotor is mogelijk verkeerd gemonteerd. Hierdoor kan de voedingsaansluiting in contact komen met een motor onderdeel.
🔔 Create a free account to get email alerts about Citroën C5 (all generations)
De voedingsaansluiting van de startmotor is mogelijk verkeerd gemonteerd. Hierdoor kan de voedingsaansluiting in contact komen met een motor onderdeel.
An electrical connection of the fuel heater in the fuel filter cover can overheat. As a result, the cover may become deformed.
null A faulty connection between the fuel lines and the diesel injectors may cause a leakage of diesel which then accumulates in the hollows at the base of the cylinder head. When these hollows are full, fuel might spill over onto the surfaces of the exhaust system, resulting in a fire hazard.
De verbinding tussen de brandstofretourleidingen en de dieselverstuivers kunnen tijdens de montage in de fabriek beschadigd zijn.
It is possible that a leak can occur between the injector spill rail connection and the plastic fuel return pipe. This can cause leakage of fuel which can either pool on the engine cylinder head and then become deposited onto the road surface where it could cause a skid risk to other motorist or if the fuel comes into contact with extremely hot engine components an exhaust manifold for instance it is possible that an under bonnet fire could ensue.
De draadbundel naar de startmotor schuurt tegen andere voertuigdelen. Hierdoor kan de draadbundel beschadigd raken.
Due to insufficient strength at the attachment point of the fuel pump return pipe, cracks may develop during use. Therefore, if use continues as is, the cracks may progress and cause fuel leakage.
It has been identified that a batch of fuel injector pumps supplied as spare parts may have covers manufactured from a defective material. This could cause the pump covers to develop fissures which over time may lead to fuel leakage.
冷却ファン・モジュールのモーターの制御基盤に不良品が組み付けられているため、冷却水温が上昇しても、冷却ファンのモーターに電流が流れず、冷却ファンが作動しないことがある。そのため、そのまま使用を続けると、エンジンがオーバーヒートする、又は、制御基盤が発熱し、最悪の場合、火災に至るおそれがある。
It has been identified that a potential fault in the engine management system could cause an internal fuel leak via one or more of the fuel injectors after switching off. This would result in a failure to restart because of excess fuel present in the inlet manifold or cylinders.
In the engine control unit, the control program may be inappropriate, so the diesel particulate filter (DPF) regeneration interval is not performed properly, and an excessive amount of particulate matter may accumulate in the DPF. As a result, the ceramic filter may overheat and be damaged during DPF regeneration, and the vehicle may no longer meet exhaust emission regulation limits.
PHEV車のエンジンコントロールユニットにおいて、ソフトウエアが不適切なため、複数気筒の失火によるプロテクションモードからの復帰後、スロットルバルブ開度と吸気バルブリフト量が最大のまま固定されてしまう。このため、エンジン回転が不安定となり、最悪の場合、走行中にエンストするおそれがある。
La pompe haute pression n’a pas été serrée au moteur avec le bon couple. par conséquent, le carburant peut s’écouler sur la route, ce qui pose un risque pour la circulation suivante.
The rear tailgate window may not be properly bonded.
The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel.
The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate
null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air to enter the fuel system which could lead to stalling of the engine and loss of control of the car.
It is possible for the engine to stall due to incorrect reading of oil levels during harsh and prolonged braking.
It has been identified that the diesel fuel return pipe which is fixed to the inlet manifold may be abraded to the extent that if left undetected will leak.
It has been identified that there is a risk of the engine stalling under very firm braking conditions.
The diesel fuel return pipe of the injection system for 1.6 HDI ( DV6) engines carries the risk that over time seeping of fuel may occur due to nonconformity in manufacture.
Due to inappropriate programming of the engine control unit, the throttle valve may oscillate with large amplitude at the closed position, which can damage the stopper of the electronic throttle motor. As a result, engine control may switch to emergency mode, reducing the vacuum supplied to the brake booster, and the brake pedal may require more force than normal.
If the urea SCR system malfunctions due to an inappropriate control program in the engine control unit, the warning lamp does not illuminate, and the vehicle does not comply with safety standards.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).