In the fuel pump impeller (resin impeller), improper molding conditions can result in low resin density, causing the impeller to swell and deform when exposed to fuel. As a result, the impeller may come into contact with the pump case, causing the fuel pump to malfunction and, in the worst case, potentially leading to engine stall while driving.
In the fuel pump impeller (resin impeller), improper molding conditions can lead to low resin density, causing the impeller to swell and deform when exposed to fuel. As a result, the impeller may come into contact with the pump case, causing the fuel pump to malfunction and, in the worst case, potentially leading to engine stalling while driving.
The high-mount stop lamp's structure is inadequate, so it may fail to absorb expansion and contraction caused by temperature changes, and cracks may form at the welded sections of the lamp. If the vehicle continues to be used in this condition, rainwater and other moisture may enter the inside of the lamp, and in the worst case, the lamp may stop lighting.
In some engines, the holes for fixing the transmission to the cylinder block were positioned improperly, so the engine and transmission were assembled with their axes misaligned. If the vehicle continues to be used in this condition, the clutch disc of a manual transmission or the drive plate of an automatic transmission may be damaged, and in the worst case the vehicle may become unable to drive.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).