Free to read · free account to contributeSuccessor to Anticars (2000)

DodgeDodge Charger LX VI

2005–2010 · 10 documented defects · 1 markets

This file gathers the known defects of the Dodge Charger LX VI, written and sourced by the community. Anyone can read; a free account lets you contribute. A defect earns the seal once enough reputable contributors have validated it.

Owners often report problems with electrical system on this car (714 complaints), but no one has explained the cause yet. Do you know it?Write it up
Owners often report problems with engine on this car (651 complaints), but no one has explained the cause yet. Do you know it?Write it up

Most serious reported defects

See all (10) →
m
CriticalElectricalNA

Electrical system: problems reported by owners

714 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2006–2010), typically at around 97,000 miles. Reported consequences: 11 crashes, 33 fires, 14 injuries, 1 death.

✓ Mecafile analysis of official data2006–2010View details →
m
CriticalEngineNA

Engine: problems reported by owners

651 owners in the United States reported problems with the engine of this car to NHTSA (model years 2006–2010), typically at around 95,000 miles. Reported consequences: 3 crashes, 20 fires, 2 injuries.

✓ Mecafile analysis of official data2006–2010View details →
m
CriticalInteriorNA

Airbags: problems reported by owners

410 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2006–2010), typically at around 100,000 miles. Reported consequences: 62 crashes, 64 injuries, 4 deaths.

✓ Mecafile analysis of official data2006–2010View details →

Latest official recalls

See all (28) →
RecallCriticalInteriorUK

Passenger airbag inflator

The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior at high speed which may result in injury to vehicle occupants in the event of a deployment event.

DVSA · United KingdomMar 20, 2026R/2026/132Model years 2007–2010View details →
RecallCriticalInteriorUK

Passenger airbag inflator

In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. The concern is caused by moisture in the air getting past faulty seals and being absorbed by the pyrotechnic biscuits in the inflator. As a result it is more likely to occur sooner in areas of high humidity and high temperature difference.

DVSA · United KingdomMar 20, 2026R/2026/125Model years 2005–2010View details →

Latest service bulletins

See all (59) →
BulletinMinorOtherNA

Bulletin

Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used

NHTSA · manufacturer bulletin10242717Model years 2010View details →
BulletinMinorEngineNA

Bulletin

If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.

NHTSA · manufacturer bulletin10227983Model years 2010View details →
BulletinMinorGearboxNA

Bulletin

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

NHTSA · manufacturer bulletin10220840Model years 2005View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).