Trans park system failure (US safety investigation)
NHTSA, the US road safety agency, opened an engineering analysis (EA91010) into this problem on 10 December 1990 for 1982–1983 models; it was closed on 31 December 1991 without a recall.
🔔 Create a free account to get email alerts about Dodge 400 (all generations)
Everything about the Dodge 400, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
NHTSA, the US road safety agency, opened an engineering analysis (EA91010) into this problem on 10 December 1990 for 1982–1983 models; it was closed on 31 December 1991 without a recall.
Front suspension crossmember may corrode and fail at lower control arm rear pivot mounts if operated where salt is used to aid in snow removal.
On certain vehicles, the crossmember can become abnormally corroded at the lower control arm attachment. This could result in lower control arm separation and loss of vehicle control. Correction: crossmembers will be inspected and replaced if corrosion is excessive. Remainder will have crossmember retaining brackets installed.
Location of hydraulic brake tube to both rear wheels causes interference and chafing between the tubes and rear suspension trailing arm pivot brackets.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0).