Airbags: problems reported by owners
221 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2005–2008), typically at around 95,000 miles. Reported consequences: 30 crashes, 1 fire, 37 injuries, 1 death.
🔔 Create a free account to get email alerts about Dodge Magnum (all generations)
Everything about the Dodge Magnum, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
221 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2005–2008), typically at around 95,000 miles. Reported consequences: 30 crashes, 1 fire, 37 injuries, 1 death.
63 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 2005–2008), typically at around 54,000 miles. Most often named: engine (25%). Reported consequences: 1 crash, 2 fires, 1 injury.
NHTSA, the US road safety agency, opened an engineering analysis (EA21002) into this problem on 17 September 2021 for 2005–2008 models; it was still open.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE13016) into this problem on 9 May 2013 for 2006 models; it was closed on 10 February 2014 without a recall.
261 owners in the United States reported problems with the fuel system of this car to NHTSA (model years 2005–2008), typically at around 80,000 miles. Reported consequences: 4 crashes, 1 injury.
In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. The concern is caused by moisture in the air getting past faulty seals and being absorbed by the pyrotechnic biscuits in the inflator. As a result it is more likely to occur sooner in areas of high humidity and high temperature difference.
The housing of the passenger airbag inflation system can crack due to internal overpressure when the airbag is deployed under normal conditions.
null A fault in the gas generator of the front passenger airbag may cause uncontrolled inflation when the airbag is activated and result in small metal particles being released, which might injure the occupants.
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).