Free to read · free account to contributeSuccessor to Anticars (2000)

Ferrari 360

1999–2004 · 0 documented defects · 3 markets
Model year
MarketAllJPNAUK
RecallCriticalEngineJP

Fuel Hose/Pipe

Because the hose length of the rollover shut-off valve (front side), which is installed to connect the left and right fuel tanks and the canister, is inappropriate, continued use may cause the hose to break due to stress generated when the hose is installed. This may illuminate the engine warning lamp, allow fuel evaporative gas to leak, and in the worst case, lead to a fire. This matter was previously filed as a recall on September 28, 2004, under filing number "1163." However, because an error was found in the selection of target vehicles, the target vehicles have been added and are being filed anew.

MLIT · JapanApr 13, 20061212980Model years 2003Auto-translated · original: JapaneseView details →
RecallCriticalEngineJP

Evaporative emission suppression device

Due to an inappropriate hose length on the front rollover shut-off valve, which is installed to connect the left and right fuel tanks to the canister, continued use may cause the hose to break under the stress generated when the hose is installed. As a result, the engine warning light and others may illuminate, fuel evaporative gas may leak out, and in the worst case, a fire may occur.

MLIT · JapanSep 28, 20041211630Model years 2000–2002Auto-translated · original: JapaneseView details →
RecallCriticalSuspensionJP

パワーステアリング

パワーステアリングポンプに接続するパワーステアリングホースのコネクタの構造が不適 切なため、エンジン又は走行時の振動により、当該コネクタが損傷するものがある。その ためパワーステアリングオイルが漏れ、ハンドルの操作力が増大し、最悪の場合当該オイ ルが排気管に飛散し火災に至るおそれがある。

MLIT · JapanJun 24, 20041211310Model years 2002–2003Shown in the original Japanese · translation pendingView details →
RecallCriticalBrakesNA

Brakes

On certain vehicles, the ABS (anti-lock braking system) / ASR (traction control system) Electronic Control Unit is affected by an error in production which may cause the braking system's ABS feature not to function and the brake failure warning light to illuminate. Also, due to the characteristics of the braking system, this error will cause the EBD (electronic brake force distribution) feature not to function, which could cause vehicle instability under hard braking. If the vehicle's use is continued despite an illuminated brake failure warning light, eventual brake failure can occur and could result in a crash. Correction: Dealer will replace the ABS / ASR Electronic Control unit.

Transport CanadaSep 4, 20032003211Model years 1999View details →
RecallCriticalInteriorNA

Airbag

On certain vehicles, the mounting of the airbag Electronic Control Unit (ECU) may not be suited for long term reliability. If left unchanged, the airbag ECU mounting could become weak and could compromise the ability of the ECU to sense a crash and deploy the airbag. Correction: Dealer will secure the airbag ECU to the body element using longer screws.

Transport CanadaSep 4, 20032003210Model years 1999View details →
RecallCriticalEngineUK

Engine oil filter may leak

Incorrect tightening of the engine oil filter coupled with a less compliant O ring design could result in a serious oil leak and subsequent fire risk.

DVSA · United KingdomJul 23, 2001R/2001/098View details →
RecallCriticalInteriorNA

Air bags

Vehicle description: Passenger vehicles. The mounting of the air bag electronic control unit (ecu) may not be suited for long term reliability. If left unchanged, the mounting could become weak and the ability of the air bag ecu to sense a crash would be impaired.

NHTSA · United StatesMar 29, 200000V098000Model years 1999View details →
RecallModerateEngineUK

Fuel vapour may leak

It has been identified that there is the possibility of a defect within the roll-over fuel shut off valves. The affected component may fracture allowing fuel vapour to be released.

DVSA · United KingdomApr 17, 2006R/2006/084View details →
RecallModerateSuspensionUK

Hydraulic steering delivery pipe could cause slight leak

The hydraulic steering delivery pipe from the pump to the rack may be defective and in consequence may develop a slight leak. This in turn could lead to a gradual reduction in the steering assistance available.

DVSA · United KingdomJul 12, 2004R/2004/121Model years 2002View details →
RecallModerateSuspensionNA

Wheels:Lugs/nuts/bolts/studs

On certain vehicles, the wheel securing bolts or lug bolts may not have been manufactured properly.

NHTSA · United StatesApr 15, 200404V184000Model years 2004View details →
RecallModerateElectricalNA

Lights And Instruments

On certain vehicles, a software programming error exists in the integrated electronic instrument cluster. Under certain circumstances, the red Electronic Brake Distribution (EBD) warning light will not illuminate. As a result, if a problem existed with the brake system and the vehicle's use was continued, loss of vehicle control and a crash could occur. Correction: Dealer will reprogram the instrument cluster.

Transport CanadaSep 4, 20032003213Model years 1999View details →
RecallModerateElectricalJP

配線

電気装置において、原動機と車体との間のアースケーブルの製造方法が不適切なため、車 両の振動により当該ケーブルが端子部から抜けることがあり、点火装置が正常に作動せず 、原動機が停止し、再始動ができなくなるおそれがある。

MLIT · JapanApr 19, 20021209470Model years 2001Shown in the original Japanese · translation pendingView details →
RecallModerateElectricalNA

Electrical system:12v/24v/48v battery

On certain passenger vehicles, the engine ground strap was manufactured improperly. As a result of the improper "crimping" of the ground strap connectors to the braided ground strap, the engine ground strap may not provide the proper electrical ground between the engine and the chassis.

NHTSA · United StatesMar 21, 200202V091000Model years 2001View details →
RecallModerateBrakesNA

Unknown or other

Vehicle description: Passenger vehicles. A software programming error exists in the integrated electronic instrument cluster. This error exists in the brake system warning light monitoring function of the instrument cluster. The red electronic brake distribution warning light does not illuminate.

NHTSA · United StatesFeb 3, 200101V025000Model years 1999View details →
RecallModerateGearboxJP

駆動力伝達部

動力伝達装置のクラッチにおいて、フライホイールに取付けられているリングギアの強度 が不適切なため、そのままの状態で使用を続けると、当該リングギアが破損し、最悪の場 合、走行不能に至るおそれがある。

MLIT · JapanNov 21, 20001208390Model years 1999–2000Shown in the original Japanese · translation pendingView details →
RecallModerateGearboxNA

Power train:Clutch assembly

Vehicle description: Passenger vehicles. The starter ring gear, which is attached to the clutch assembly with three mounting screws, could become separated from the clutch assembly. This possible failure could be caused by (1) the fracture of the starter ring gear itself at the mounting holes due to an incorrect positioning of the mounting holes, or (2) by the failure of the mounting screws. If either of these conditions would occur, the result would be fragments of the starter ring gear being thrown from the clutch area.

NHTSA · United StatesOct 24, 200000V340000Model years 1999–2000View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).