The airbag module software may be faulty
The airbag control module software may be defective. As a result, the airbags may not deploy in the event of a crash, which increases the risk of injury.
🔔 Create a free account to get email alerts about Fiat Tipo (all generations)
The airbag control module software may be defective. As a result, the airbags may not deploy in the event of a crash, which increases the risk of injury.
The pressure build-up valve (PBU) of the 48 volt battery may be defective. This could lead to a loss of battery functionality and overheating if water gets in, increasing the risk of fire.
The airbag module software may be defective.As a result, the airbags may not be activated in the event of an accident, increasing the risk of injury.
Due to a fault in the airbag control module software the airbag system may fail to be active without this being indicated on the instrument panel.
The driver�s airbag was manufactured with an incorrectly manufactured airbag inflator initiator that may not ignite when a deployment voltage is provided to the initiator. As a result vehicles may experience a �non-deployment� of the driver airbag during a crash event warranting an airbag deployment which could increase the risk of injury.
null The mixture ratio of the airbag ignition chemicals is incorrect and, in the event of an accident, this could prevent deployment of the airbags.
null The cables of the driver's airbag may rub against the steering wheel cable clamp, causing wear which could result in a short circuit and unintentional deployment of the driver's airbag.
It has been identified that due to the non-conforming layout of the airbag wiring and missing cut-proof protection the airbag wiring may interfere with the steering wheel wiring terminal. This can cause the abrasion of the wiring itself. This abrasion may cause a short-circuit and consequent inadvertent deployment of the steering wheel airbag.
In some vehicles equipped with ABS (Anti-lock Braking System), improper fitting dimensions between the wheel hub and the hub bearing (rolling bearing) on the rear axle can cause cracks in the vehicle speed sensor rotor mounting section of the wheel hub. If the vehicle continues to be driven in this condition, the rotor may shift out of position and the ABS may stop functioning. In the worst case, the wheel hub may break and the rear wheel may come off.
Affected vehicles may display incorrect tyre size information on the Certificate of Conformity (CoC).
Defective wheel rims can lead to fatigue fractures. As a result, the wheels may be damaged, which can impair vehicle handling and increase the risk of an accident.
Affected vehicles may have been fitted with a faulty 48-volt battery. This may lead to a loss of the functionality of the battery. This may result in a risk of thermal run away in the case of water infiltration.
Defective wheel rims can lead to fatigue fractures. As a result, the wheels can become damaged which can adversely affect the handling of the vehicle, increasing the risk of an accident.
De bedrading van de bestuurdersairbag kan in contact komen met de stuurwielbedrading en doorschuren.
A specific batch of vehicles have been equipped with front suspension coil springs which may suffer from localised corrosion. This can cause breakage of the springs with an adverse effect on vehicle control.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).