Power train:Automatic transmission:Torque converter
Ford is recalling certain model year 2004 and 2005 ford freestar and mercury monterey vehicles. The torque converter output shaft may fail.
🔔 Create a free account to get email alerts about Ford Freestar (all generations)
Ford is recalling certain model year 2004 and 2005 ford freestar and mercury monterey vehicles. The torque converter output shaft may fail.
On certain mini van conversions, the brake lines may have been routed incorrectly. The brake lines can make contact and chafe on the stabilizer bar.
On certain minivans, the power steering low-pressure line may not be fully seated at the rack and pinion steering gear.
Ford is recalling certain model year 2004-2007 Freestar and Mercury Monterey vehicles manufactured from March 24, 2003, through November 7, 2006, equipped with a third row seat and originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. The third row stowable seat can experience corrosion and structural degradation at the seat anchor mechanism mounted to the rear wheel wells. As a result of the corrosion, the third row seat may not fully latch into its seating position.
Certain vehicles fail to comply with requirements of CMVSS 108 - Lighting System and Retroreflective Devices. The Daytime Running Light (DRL) system is inoperable, and therefore, the vehicle may be less visible to other motorists and pedestrians during daylight hours. Normal headlamp function is not affected. Correction: Dealers will reprogram the electronic module to activate the DRL function.
On certain vans equipped with the power liftgate option, the power liftgate motor automatically disengages after the liftgate is powered open.
Certain Ford Freestar vehicles modified for wheelchair accessibility by Liberty Motor Company Inc. do not comply with the requirements of CMVSS 210. The second row bench seat only has one set of lower universal anchors (UAS) instead of the required two sets. Also, certain vehicles do not have tether anchor brackets for the bench's two outboard seating positions. This non-compliance would prevent proper installation of a child seat to an outboard seating position. Correction: Owners should contact Liberty Motor Company and then bring their vehicles to a trusted service shop or Ford dealership to have two tether anchors and two UAS brackets installed.
Certain minivans may have been produced with front wheel hub assemblies that were not heat treated correctly. This condition may lead to the development of small cracks in the hub.
Certain vehicles do not comply with the requirements of CMVSS 120. The Standard specifies that for vehicles other than passenger cars, the label information shall display after each GAWR, the size designation and, if applicable, the type designation of rims. This information was inadvertently omitted from the compliance label affixed to the affected vehicles. Correction: Since this does not pose any safety risk, no corrective action is required.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).