Structure
Ford Motor Company (Ford) is recalling certain 2017 GT vehicles previously repaired incorrectly under recall 18V707. The rear wing valve block may leak hydraulic fluid.
🔔 Create a free account to get email alerts about Ford GT (all generations)
Everything about the Ford GT, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
Ford Motor Company (Ford) is recalling certain 2017 GT vehicles previously repaired incorrectly under recall 18V707. The rear wing valve block may leak hydraulic fluid.
The ammonium nitrate propellant used in the airbag inflator may undergo a material change over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures, and high-temperature cycling. In the event of airbag deployment, it may under-inflate, or excessive internal pressure may cause the inflator housing to rupture, and metal fragments may pass through the airbag material, causing injury to occupants.
Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Certain 2020 Model Year Mustang GT500/GT350 Equipped with a 5.2L Engine Secondary Timing Chain Tensioner In some of the affected vehicles, the engines secondary timing chain tensioner may not have been properly activated during assembly, which could result in a timing loss. Timing loss could lead to internal engine damage, a rough running engine, and engine misfires.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0).