Vehicle description: Passenger cars. The seat belt buckle tongue may not fully eject from the buckle assembly when the release button is pushed slowly. This condition could also result in a partial latch of the tongue in the buckle.
NHTSA · United StatesApr 27, 200101V144000Model years 2001View details →
On vehicles equipped with a driver side supplemental air bag, the centre post threads of the air bag module may have been damaged during assembly. In a deployment level collision, the centre post housing may separate from the air bag adapter causing the air bag not to inflate properly. In addition, hot combustion gases would flow directly through the air bag rather than through the normal filtering and cooling devices, presenting the possibility of burn injury to vehicle occupants. Correction: Air bag modules will be inspected and replaced if necessary.
Transport CanadaNov 21, 19901990182Model years 1990View details →
Ford Motor Company (Ford) is recalling certain model year 2009-2012 Ford Flex, 2008 and 2010-2012 Ford Taurus, 2008-2009 Ford Taurus X, 2008 Mercury Sable, 2009 and 2011 Lincoln MKS vehicles. The driver frontal air bag may improperly inflate during second-stage deployment in the event of a high speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
NHTSA · United StatesApr 26, 201616V247000Model years 2008–2012View details →
Vehicle description: Certain sport utility vehicles, pickup trucks, and passenger vehicles fail to comply with the requirements of fmvss 225, "child restraint anchorage systems." the affected expedition/navigator owner guides do not identify the locations of seating positions equipped with tether anchorages, and do not provide instructions for securing child seats to these tether anchorages. The f150 sc owner guides do not provide the procedure for securing child seats to the tether anchorages. The taurus/sable owner guides do not identify the center rear seating position as having latch compatible lower anchorages.
NHTSA · United StatesNov 28, 200000V396000Model years 2001View details →
Vehicle description: Passenger vehicles. The child safety seat anchor latch (iso-fix anchor) fasteners do not have adequate residual torque. The anchors are secured to the floor pan with a reinforcement plate that has two studs that extend upward through the floor pan and the iso-fix anchor. The sealer on the floor pan could cause a soft joint and, even if the nuts are properly torqued, road vibrations could cause the nut to work its way completely off the stud.
NHTSA · United StatesAug 24, 200000V240000Model years 2001View details →
Vehicle description: Passenger vehicles. The seat belt retractor may have a pin shaft in the switchable elr/alr mechanism that is incorrectly formed. In some circumstances, the switching mechanism could become nonfunctional, preventing the seat belt webbing from being extracted from the retractor. It is also possible that malfunction of the mechanism could prevent the belt from being switched into the alr mode. The elr mechanism is not affected by this condition.
NHTSA · United StatesSep 20, 199999V250000Model years 1999View details →
These vehicles may have a front seat belt buckle attaching stud that may have been improperly heat treated. This heat treating may have resulted in cracks developing in the stud. If the stud is cracked, there is the potential for less than the intended level of occupant restraint in the event of a vehicle crash. Correction: Seat belt buckle mounting bracket and stud assembly will be replaced on affected vehicles.
Transport CanadaAug 28, 19981998173Model years 1998–1999View details →
Vehicle description: Passenger vehicles equipped with manual seat tracks. The front seat belt buckle attaching stud may have been improperly heat treated. This heat treatment may have resulted in cracks developing in the stud.
NHTSA · United StatesAug 25, 199898V198000Model years 1998–1999View details →
Seat belt buckles on these vehicles may experience conditions whereby the buckle may not unlatch when the release button is depressed or may not latch, or in some cases, may latch partially but not sufficiently to provide occupant restraint in the event of a collision. Note: Only end-release buckles on "rigid" mountings are susceptible to this malfunction. Correction: Factory installed end-release seat belt buckles will be replaced with redesigned buckles.
Transport CanadaSep 29, 19921992120Model years 1989–1990View details →
The rigid mounted safety belt buckles are defective in three ways. First, a fastened safety belt buckle will not unlatch when the release button is depressed. This results from interference between the buckle ejector finger and the buckle tongue window. The second defect is the safety belt buckle may not latch. The third possible defect is that the tongue may be retained by the buckle, but it may not be latched sufficiently to provide occupant protection.
NHTSA · United StatesAug 17, 199292V113000Model years 1989–1990View details →
The power seat switch wiring is routed over rather than under the front seat support brace, allowing damage by seat cushion spring ends when seat is occupied.
NHTSA · United StatesMar 4, 199191V036000Model years 1988–1989View details →
The right quarter windows may contain glass which was improperly tempered. This glass may yield pieces larger than the maximum allowed by fmvss 205, glazing material. Consequence of defect: In case of an accident these large pieces of glass may seriously injure the occupants of the car.
NHTSA · United StatesMar 10, 198686V039000Model years 1986View details →
Certain vehicles do not comply with CMVSSS. 208 - seat belt installations. The french language version of the air bag maintenance/information/instruction label was not installed. Note: for taurus models only police and sho vehicles are affected. Correction: French language labels will be mailed to affected owners.
Transport CanadaSep 29, 19921992123Model years 1992View details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).