On certain vehicles, excessive enlargement of a pilot hole in the rear brake backing plate could allow the wheel cylinder to rotate possibly leading to loss of brake fluid in the rear brakes and loss of rear braking capability.this Would result in increased stopping distances and possible crash. note: vehicles in ontario and quebec only.
Transport CanadaMay 28, 19861986056Model years 1980–1984View details →
The axle retaining "c" clip in the differential may dislodge and allow the axle, wheel and brake drum to separate from the vehicle when subjected to side forces. Axle separation could result in loss of vehicle control and possible crash.
Transport CanadaJan 11, 19851985010Model years 1980View details →
The rear brake system brake pipe from the master cylinder to the proportioner valve on these vehicles may be contacting the air cleaner resonator bracket. Over an extended period of operation, the brake pipe could wear through sufficiently to cause a loss of brake fluid and a partial loss of braking action. If a vehicle happens to be in motion at a time when minimum stopping distance is required, this condition could result in a vehicle crash without prior warning. Models equipped with 5.7 l. V-8 diesel engines.
Transport CanadaOct 7, 19831983083Model years 1983View details →
"tx" heavy duty wheels may have been manufactured with laminated steel. The wheel disc may fracture and the wheel and tire could partially or completely separate from the vehicle.
NHTSA · United StatesMar 23, 198181V036000Model years 1981View details →
A small nylon bushing in the cruise control servo bail may slip out of place, causing intermittent and unexpected increases in engine speed or dieseling (engine run on with ignition off).
NHTSA · United StatesJun 16, 198989V102000Model years 1984View details →
On certain vehicles, excessive enlargement of a pilot hole in the rear backing plate could allow the wheel cylinder to rotate possibly leading to loss of rear braking action.
Transport CanadaApr 29, 19851985049Model years 1980View details →
Rear axle assembly may have axles that were improperly manufactured. This condition may result in separation of the axle shaft and wheel assembly from the vehicle.
NHTSA · United StatesNov 24, 198484V149000Model years 1980View details →
The master cylinder rear brake pipe, which carries brake fluid to the rear brakes, may develop a leak due to extended chafing on the air cleaner resonator bracket.
NHTSA · United StatesOct 13, 198383V106000Model years 1983View details →
On vehicles equipped with heavy duty wheels, the wheel discs may crack and could result in separation of the tire and part of the wheel from the vehicle. This could cause loss of vehicle control.
Transport CanadaMar 26, 19811981038Model years 1981View details →
The bolts that attach the lower rear control arm to the frame may fracture. The rear control arm supports and positions the rear axle. Fracture of the bolts would allow the control arm to drop free.
NHTSA · United StatesFeb 25, 198181V025000Model years 1980–1981View details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).