Free to read · free account to contributeSuccessor to Anticars (2000)

Honda Capa

1998–2002 · 0 documented defects · 1 markets
Model year
MarketAllJP
RecallCriticalInteriorJP

Airbag

In the driver-side airbag inflator (gas generator), moisture protection is inadequate, so the gas-generating agent may absorb moisture. Therefore, if the gas-generating agent repeatedly absorbs moisture and dries out during use, the airbag may not deploy normally when it is activated.

MLIT · JapanJan 23, 20201146460Model years 1997–1999Auto-translated · original: JapaneseView details →
RecallCriticalBrakesJP

Other (Other)

Vehicles equipped with the Manual Driving Assist Device (Honda Techmatic) have a brake link mechanism whose bearing structure is inappropriate, so excessive stress may be applied to the bearing section in some cases. If use is continued as is, cracks may develop in the fastening bolts of the bearing section and, in the worst case, the bolts may break, potentially causing the brakes to stop working.

MLIT · JapanNov 24, 20111128560Model years 1997–2003Auto-translated · original: JapaneseView details →
RecallCriticalSuspensionJP

Clip, bottle/nut

On four-wheeled vehicles, some wheel bolts used to attach the wheels to the running gear have been heat-treated improperly. If the vehicle continues to be used in this condition, the bolts may break and, in the worst case, the wheel may come off.

MLIT · JapanJun 6, 20011107490Model years 2001Auto-translated · original: JapaneseView details →
RecallModerateEngineJP

Starting device

In the starting system of the engine, the current flowing through the contacts of the ignition switch is large, so a large arc discharge occurs at the moment the main power is turned on. Repeated starting operations cause the contacts to wear excessively and their contact pressure to drop. As a result, vibration during driving can move the contacts, causing them to ride up onto carbide deposits and produce a poor electrical connection. In the worst case, the engine may stop suddenly. Note that restarting is possible, because the contacts slide during the starting operation and remove the carbide deposits.

MLIT · JapanSep 19, 20021108760Model years 1999Auto-translated · original: JapaneseView details →
RecallModerateEngineJP

Starting device

In the engine starting system, the current flowing through the contacts of the ignition switch is large, so a strong arc discharge occurs at the moment the main power is turned on. Repeated starting operations cause excessive wear of the contacts and reduce contact pressure. As a result, vibration during driving may move the contacts, causing them to ride over carbon deposits and leading to poor conduction. In the worst case, the engine may stop suddenly. Note that restarting is possible, since the sliding of the contacts during the starting operation removes the carbon deposits.

MLIT · JapanMay 24, 20021108420Model years 1997–1999Auto-translated · original: JapaneseView details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).