This file gathers the known defects of the Honda Crossroad I, written and sourced by the community. Anyone can read; a free account lets you contribute. A defect earns the seal once enough reputable contributors have validated it.
Most serious reported defects
No defect documented for this selection yet.
RecallCriticalBrakesJP
Vehicles equipped with the Manual Driving Assist Device (Honda Techmatic) have a brake link mechanism whose bearing structure is inappropriate, so excessive stress may be applied to the bearing section in some cases. If use is continued as is, cracks may develop in the fastening bolts of the bearing section and, in the worst case, the bolts may break, potentially causing the brakes to stop working.
RecallCriticalElectricalJP
Because the contacts inside the brake light switch lack sufficient capacity for the electrical load, the contacts become welded (stuck) when the brake is applied, and the brake light remains lit. If the vehicle continues to be used in this condition, the brake light switch may overheat and the wiring may melt, which in the worst case could lead to smoke or fire. 2) The brake lights may stop illuminating, and the shift lever may become unable to move out of the Park position.
RecallCriticalEngineJP
The vent ring welded to the resin fuel tank (to which the vent valve is connected so that liquid fuel is not drawn into the evaporative emission canister while driving) may crack due to improper molding, as the fuel tank repeatedly expands and contracts. Therefore, when the fuel level is high, fuel may leak from the vent ring.
Latest service bulletins
No service bulletin found for this model.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0).