In the remedial measures for the low-pressure fuel pump, some units were shipped with the wrong gasket because the packing of the remedy parts was improper. As a result, the incorrect gasket may have been installed during the remedial work, leading to insufficient sealing between the fuel pump and the fuel tank, and there is a risk of fuel leakage when the fuel tank is full.
During recall work, the low-pressure fuel pump replacement was performed improperly: in some cases, the replacement lock nut was reused, and after the parts were installed, the nut was tightened without using the specified tool. As a result, if the vehicle continues to be used as is, the sealing force may decrease, and gasoline may leak from the pump's mounting area.
In the impeller (resin impeller) of the low-pressure fuel pump, improper molding conditions can lower the resin density, causing it to swell and deform when exposed to fuel. As a result, the impeller may contact the pump cover, causing the fuel pump to malfunction and, in the worst case, potentially leading to engine stalling while driving.
In the brake operating simulator of the electric servo brake system, improper manufacturing processes may allow the assembly oil used during production to infiltrate the pressure sensor. As a result, the resistance section inside the sensor may corrode during use, causing abnormal output values. This may illuminate the warning light and activate the fail-safe function, potentially increasing the brake pedal operating force.
MLIT · JapanOct 26, 20171141300Model years 2013–2017Shown in the original Japanese · translation pendingView details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).