Free to read · free account to contributeSuccessor to Anticars (2000)

Hyundai XG

1986– · 7 generations · 0 documented defects · 3 markets
Generations

Everything about the Hyundai XG, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.

Most serious reported defects

No defect documented for this selection yet.

Latest official recalls

See all (28) →
XG V · 2011–2016
RecallCriticalBrakesNAPark outside until repaired

Service brakes, hydraulic:Antilock/traction control/electronic limited slip:Control unit/module

Hyundai Motor America (Hyundai) is recalling certain 2011-2015 Elantra, Genesis Coupe, Sonata Hybrid, 2012-2015 Accent, Azera, Veloster, 2013-2015 Elantra Coupe, Santa Fe, 2014-2015 Equus, 2010-2012 Veracruz, 2010-2013 Tucson, 2015 Tucson Fuel Cell, and 2013 Santa Fe Sport vehicles. The Anti-Lock Brake System (ABS) module may leak brake fluid internally and cause an electrical short, which can result in an engine compartment fire while parked or driving.

NHTSA · United StatesSep 22, 202323V651000Model years 2012–2015View details →
XG V · 2011–2016XG VI · 2016–2022
RecallModerateBodyNA

Latches/locks/linkages:Trunk lid:Latch

Hyundai Motor America (Hyundai) is recalling certain 2017-2018 Sonata, 2016-2018 Sonata Hybrid, 2018-2020 Accent, and 2016-2017 Azera vehicles. The trunk latch may become damaged, preventing the opening of the trunk from the inside. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 401, "Internal Trunk Release."

NHTSA · United StatesAug 6, 202121V619000Model years 2016–2017View details →
XG IV · 2005–2011
RecallCriticalBrakesNA

Brakes

On certain vehicles equipped with an anti-lock brake system (ABS), the ABS module remains powered on when the vehicle is turned off. If moisture were to enter the module, over time, an electrical short could occur, which could increase the risk of an underhood fire causing injury and/or property damage. Correction: Dealers will install a relay in the vehicle’s main junction box to ensure the ABS module is powered off upon the vehicle being turned off.

Transport CanadaJan 16, 20182018033Model years 2006–2009View details →

Latest service bulletins

See all (158) →
XG III · 1998–2005
BulletinModerateInteriorNA

Bulletin

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous drivers-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

NHTSA · manufacturer bulletin11032523Model years 2002View details →
XG III · 1998–2005
BulletinModerateInteriorNA

Bulletin

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driverside airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or noncertified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

NHTSA · manufacturer bulletin11032522Model years 2002View details →
XG III · 1998–2005
BulletinMinorBodyNA

Bulletin

This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

NHTSA · manufacturer bulletin10251285Model years 2004View details →

Latest forum threads

No discussion yet.

Defects and discussions are filed under a generation: pick one above to add yours.

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).