Airbags: problems reported by owners
100 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2002–2007), typically at around 105,000 miles. Reported consequences: 10 crashes, 10 injuries.
🔔 Create a free account to get email alerts about Infiniti FX (all generations)
Everything about the Infiniti FX, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
100 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2002–2007), typically at around 105,000 miles. Reported consequences: 10 crashes, 10 injuries.
23 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2003–2007), typically at around 39,000 miles. Most often named: foundation components:disc:rotor (17%). Reported consequences: 3 crashes, 3 injuries.
32 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2008–2014), typically at around 109,000 miles. Reported consequences: 1 crash, 23 injuries, 1 death.
NHTSA, the US road safety agency, opened an engineering analysis (EA21002) into this problem on 17 September 2021 for 2003–2007 models; it was still open.
NHTSA, the US road safety agency, opened an engineering analysis (EA21002) into this problem on 17 September 2021 for 2008 models; it was still open.
승객석 에어백 쿠션 공급업체 (JSS Joyson Safety System)의 생산 공정상의 문제로 에어백 폴딩 쿠션의 가스 경로의 폭이 좁게 제작되어 고온에서 에어백 전개 시 인플레이터의 가스 분출 경로가 제한되고 이로 인해 내부 압력이 예기치 않게 상승하여 에어백이 찢어질 수 있으며, 이런 경우 승객석에 탑승한 동승자에게 상해를 입힐 수 있는 가능성에 따른 리콜 <*대상차량별 생산일자> FX35: 2005.11.04~2007.05.17 FX35: 2007.06.04~2008.04.17 FX45: 2005.11.07~2007.05.15 FX45: 2007.06.04~2008.04.09
Nissan North America, Inc. (INFINITI) is recalling certain 2003 INFINITI FX35, 2006-2008 FX35 and FX45 vehicles that previously received a replacement front passenger air bag assembly under recall number 20V-008. The air bag cushion was folded incorrectly, which could increase internal pressure and tear the air bag cushion during deployment.
Wear on the upper steering column bearing could lead to increased friction during steering. Continued use of the damaged steering column could lead to full loss of steering power, increasing the risk of an accident.
Voluntary Service Campaign ID # P3156 is no longer active. Repair orders opened after this bulletins published date are no longer eligible for reimbursement under Campaign ID # P3156. Discard all previous versions of ITB03-068.
BATTERY QUICK CHARGE NOTICE SERVICE INFORMATION When charging the vehicles 12 volt battery with the high amperage quick charge function, the ignition should never be ON, or turned ON, while charging. Attempting to start the vehicle, or turning the ignition ON, while using the high amperage quick charge could potentially damage the fuel pump control module. Only turn the ignition ON when either the ESM or a technical service bulletin service procedure states to do so, and only while using a battery maintainer or smart charger set to reflash mode, or a similar setting. Battery voltage should not exceed 16V during a reprograming operation.
CLEANING FRONT OR REAR COMBINATION LAMP ASSEMBLIES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).