Free to read · free account to contributeSuccessor to Anticars (2000)

JaguarJaguar XJS

1975–1996 · 3 generations · 1 documented defects · 1 markets
Generations
Model year
MarketAllNAUK
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallCriticalInteriorNA

Seat belts

The normal lockup function of the automatic (passive) belt reel can cause the belt motor winch assembly to lockup such that the passive belt system will not deploy/function or gets stuck at various points along the track causing the kinking or breaking of its cable or detachment of the tongue.

NHTSA · United StatesNov 1, 199393V179000Model years 1987–1989View details →
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallCriticalSuspensionUK

Leakage from power steering hose

Oil may leak from the crimping on the power assisted steering high pressure hose. This could result in loss of steering power assistance.

DVSA · United KingdomMay 20, 1992R/1992/019Model years 1990View details →
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991XJS (Facelift) · 1991–1996
RecallCriticalEngineNA

Fuel System

The high tension lead from the ignition coil may move from its production location closer to the #4a fuel injector hose. This could result in ozone degradation of the injector hose and possible fuel leaks. Such leaks could cause an underhood fire. Correction: Both "a & b" bank high tension king leads will be replaced. #4 injector hose will be inspected for signs of cracking/splitting and replaced as necessary.

Transport CanadaJan 23, 19921992005Model years 1989–1991View details →
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991XJS (Facelift) · 1991–1996
RecallCriticalElectricalNA

Electrical system:Ignition

The high tension lead from the ignition coil can move from the production location closer to the #4a fuel injector hose. This could lead to the outer and inner injector hoses cracking or splitting from ozone deterioration.

NHTSA · United StatesJan 23, 199292V009000Model years 1989–1991View details →
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991XJS (Facelift) · 1991–1996
RecallCriticalEngineNA

Fuel System

Note: 1978-90 models excessive fuel vapour pressure can occur such that a weakening of the fuel tank structure can result in fuel leaks. In the presence of an ignition source, a vehicle fire could result. Correction: Dealers will install a revised fuel purge system which eliminates excessive vapour pressure build-up.

Transport CanadaJul 27, 19901990114Model years 1983–1991View details →
XJS XJ-S (Pre H.E.) · 1975–1981XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallCriticalEngineNA

Engine

Xj-s 1982-90 xj12/vanden plas 1980-90 dirt ingress may cause the electronically controlled valves in the cruise control actuator to malfunction. If this occurs, the cruise control will fail to disengage under normal operating conditions resulting in possible loss of driver control. Correction: Cruise control actuator operation will be checked and an additional vacuum dump will be installed.

Transport CanadaFeb 21, 19901990034Model years 1982–1990View details →
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
XJS XJ-S (Pre H.E.) · 1975–1981XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallCriticalEngineNA

Fuel system, gasoline:Fuel injection system:Fuel rail

Possible fuel leakage from the engine fuel injection system, particularly in the area of the hose/clip fittings. Consequence of defect: The presence of an ignition source, with fuel leakage, could result in an engine compartment fire or the destruction of ignition distributor cap.

NHTSA · United StatesJul 3, 198585V087000Model years 1980–1985View details →
XJS XJ-S (Pre H.E.) · 1975–1981XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallCriticalEngineNA

Recall

Due to misalignment of fuel rail halves and effects of temperature change on the connections, there is the possibility of fuel leakage at the fuel rail joints. Fuel leakage could present the potential for fire. Vin - xj12 - 310613 to 365261 xjs - 104146 to 111980

Transport CanadaDec 20, 19831983118Model years 1980–1982View details →
XJS XJ-S (Pre H.E.) · 1975–1981XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallCriticalEngineNA

Fuel system, gasoline:Fuel injection system:Fuel rail

Fuel leakage may develop at the two main fuel rail connections. Deterioration at these two connections has been traced to a combination of misalignment of the two rail halves and the effect of temperature changes.

NHTSA · United StatesDec 20, 198383V135000Model years 1980–1983View details →
XJS XJ-S (Pre H.E.) · 1975–1981XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
XJS XJ-S (Pre H.E.) · 1975–1981XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallCriticalEngineNA

Recall

Deterioration of high pressure fuel hoses in the engine bay can cause fuel leakage which could result in possible engine compartment fire

Transport CanadaOct 22, 19811981107Model years 1980–1982View details →
XJS (Facelift) · 1991–1996
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallModerateOtherNA

Vehicle speed control

Electronically controlled valves in the cruise control actuator may not function properly due to dirt entering the valves.

NHTSA · United StatesFeb 20, 199090V035000Model years 1982–1990View details →
XJS XJ-S (Pre H.E.) · 1975–1981XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallModerateEngineNA

Fuel System

V.I.N. Xj12 - 310613 to 431598 xjs - 104146 to 125224 a potential exists for leakage from the fuel delivery system which could result in engine compartment fires.

Transport CanadaJul 3, 19851985080Model years 1980–1985View details →
XJS XJ-S (Pre H.E.) · 1975–1981XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallModerateElectricalNA

Recall

The supplier of the fuel cut-off inertia switch made unauthorized changes to the switch contacts. Under certain conditions a high electrical resistance and open circuit may result, preventing current flow to the fuel pump.

Transport CanadaMar 22, 19821982030Model years 1981–1982View details →
XJS XJ-S H.E., 3.6, XJ-SC · 1981–1991
RecallModerateEngineNA

Fuel system, gasoline:Delivery:Fuel pump

Certain vehicles may be fitted with an unauthorized fuel pump electrical inertia switch. This switch has a tin coating added to the contacts that create the potential for a high electrical resistance. This could cause overheating and possible distortion of the plastic mounting around the fixed contact. This could result in inability to start the vehicle since there is a flow of current to the fuel pump.

NHTSA · United StatesMar 9, 198282V022000Model years 1982View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).