null For the carbon and ceramic brakes, the stainless steel bolts fixing the rotor to the metal bell may fail due to stress corrosion cracking where the vehicle is used in environments with a high salt content. If the disc lost more than eight of the ten bolts there would be a loss of braking capacity on that wheel. This could slightly increase the braking distance, which could in turn result in a collision.
EU Safety GateNov 13, 2013A12/1590/13Model years 2005–2010View details →
On vehicles fitted with carbon ceramic brakes the stainless steel screws fixing the rotor to the metal bell may fail due to stress corrosion cracking if the vehicle has been used in extreme salt environments. The customer will experience a noise when a screw fails and the brake continues to be 100% effective. However if the affected disc was to lose 8 of the 10 screws there would be a loss of braking at that wheel. Although the maximum bolt failure worldwide has been 3 theoretically the concern could lead to an increase in stopping distance and a collision.
DVSA · United KingdomOct 4, 2013R/2013/111Model years 2007–2009View details →
null In the case of persistent, severe load conditions, hydraulic fluid could leak from a high pressure pipe in the power steering system. Leaking fluid could touch hot engine areas resulting in the risk of fire.
EU Safety GateDec 12, 2012A12/1862/12Model years 2009–2012View details →
As part of continuous product monitoring Automobili Lamborghini Spa has found that in rare cases of persistent severe load conditions and mechanical stress due to fluid pressure into the power steering system a little hole might develop in the pipe. This could result in a small fluid leakage.
DVSA · United KingdomOct 1, 2012R/2012/096Model years 2005–2008View details →
Lamborghini is recalling certain model year 2004-2006 Gallardo Coupe and Spyder vehicles. In certain driving conditions, the high pressure steering pipes near the the steering assistance hydraulic system pump might leak.
NHTSA · United StatesSep 4, 201212V430000Model years 2004–2006View details →
On certain vehicles, the power steering high pressure line may develop a leak. Loss of steering fluid could cause a loss of steering power assist, which may result in a crash causing property damage and/or personal injury. Also, power steering fluid leakage may contact a hot engine or exhaust component, which could result in a fire. Correction: Dealers will replace the power steering high pressure line.
Transport CanadaSep 3, 20122012297Model years 2004–2006View details →
On certain vehicles, the engine can be started without the clutch pedal being depressed. Should this occur while the transmission is in gear, the vehicle can lurch forward or back, depending which gear was selected. Such unintended movement could result in property damage, or cause the vehicle to strike a bystander, potentially resulting in personal injury or death. Correction: Dealers will install a clutch pedal switch assembly.
Transport CanadaApr 10, 20082008121Model years 2006–2008View details →
Issue: On certain vehicles, an engine software update may have been performed incorrectly. This could cause trouble codes to not be stored when the ignition key is turned off. If a fault was present, this could cause a warning lamp not to light up the next time the engine is started. Safety Risk: A warning lamp that does not turn on may not provide a driver with important information about vehicle safety systems. This could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the engine software. Note: This is an expansion of recall 2018-662.
Transport CanadaJul 2, 20192019328Model years 2011–2014View details →
엔진 컨트롤 유닛(ECU) 소프트웨어 프로그램 입력 작업 오류로 인하여, 경고등 고장 정보저장 기능에 오류가 발생할 수 있는 가능성에 따른 리콜
Gallardo Coupe: 2010.08.27~2013.09.06
Gallardo Spyder: 2010.07.13~2013.07.29
MOLIT · South KoreaMay 10, 20193095Model years 2010–2013Shown in the original Korean · translation pendingView details →
On one vehicle, an engine software update may have been performed incorrectly, causing diagnostic trouble codes to not be stored when the ignition key is turned off. If a fault was present, this could cause the warning lamp not to light when the engine is next started. This could create a situation where the driver is not provided with important information about vehicle safety systems, which may increase the risk of a crash causing injury and/or property damage. Correction: Dealers will update the engine software. Note: This recall is superseded by recall 2019328. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019328">recall 2019328</a> for more information.
Transport CanadaNov 29, 20182018662Model years 2013View details →
Automobili Lamborghini (Lamborghini) is recalling certain 2011-2014 Gallardo Coupe and Gallardo Spyder vehicles. The Engine Control Unit (ECU) software may erase trouble codes after the ignition is turned off, not illuminating warning lamps and preventing drivers from being warned of safety system problems the next time that they are driving.
NHTSA · United StatesNov 27, 201818V833000Model years 2011–2014View details →
On certain vehicles, the brake rotor fixing screws may fail. This could result in reduced braking performance, which could increase stopping distances and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the screws with an updated design.
Transport CanadaOct 2, 20132013341Model years 2007–2009View details →
Automobili Lamborghini America LLC (Lamborghini) is recalling certain model year 2007 through 2009 Gallardo Coupes and Spyders fitted with carbon ceramic brake discs. The stainless steel screws that secure the brake rotors may fail after being exposed to salty conditions.
NHTSA · United StatesSep 30, 201313V471000Model years 2007–2009View details →
On vehicles fitted with ceramic disc rotors for the front and rear brakes, the bolts used to attach the disc rotors to the bell housing are made of an inappropriate material. As a result, when the vehicle is operated in a high-salinity environment, these bolts may corrode and break, causing abnormal noise and vibration while driving.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).