Due to a software issue, the parking assist control unit that works with the Surround View Monitor (PVM) to display the rearview camera image may freeze briefly during backup if reverse is selected shortly after the vehicle is started. In addition, the rearview camera may not appear the next time the vehicle is started if the vehicle is turned on and off again within a short period of time. This may increase the risk of an accident with a person or other vehicle during a support event.
EU Safety Gate · RappelConso · FranceAug 10, 2026sr/03911/25Model years 2021–2025Auto-translated · original: FrenchView details →
For certain vehicles equipped with a Parking Assist ECU a component of the Panoramic View Monitor (PVM) system that displays the rear view image the software may cause the rear view image to freeze or not display
DVSA · United KingdomDec 1, 2025R/2025/467Model years 2023–2025View details →
For certain vehicles equipped with the combination meter system (where various information is displayed) that due to an improper programming of the combination meter unnecessarily repetitive data is written to a memory device. This may cause the memory device to deteriorate and the monitor to not display during the meter at start up and remain in this state permanently.
DVSA · United KingdomNov 24, 2025R/2025/275Model years 2023–2025View details →
A flaw in the vehicle's combination meter programming causes it to deteriorate its memory. Due to this the display of the monitor may not work, removing access to the speedometer and warnings. This increases the risk of accidents.
EU Safety GateAug 12, 2025SR/02991/25Model years 2022–2025View details →
This recall addresses a software malfunction in the parking assist ECU. If the reverse gear is engaged immediately after starting the vehicle, or if the engine is started repeatedly within a short period, the rear camera image may temporarily freeze or fail to display. In such cases, there is a concern that the risk of collision with pedestrians and obstacles behind the vehicle increases.
<Production dates of affected vehicles>
Alphard HEV: 2023.06.09~2025.05.09
Crown HEV: 2023.03.02~2025.04.02
Crown Dual Boost HEV: 2023.03.02~2025.04.04
Camry HEV: 2024.06.04~2025.08.19
SIENNA HEV 2WD: 2024.12.04~2025.09.12
SIENNA HEV AWD: 2024.12.04~2025.09.12
Highlander HEV: 2023.02.21~2025.10.03
ES300h: 2022.08.05~2025.08.21
RX350h: 2022.12.21~2025.09.26
RX450h+: 2022.11.17~2025.09.26
RX500h: 2023.03.03~2025.08.29
NX350h: 2021.04.22~2025.05.14
NX450h+: 2021.04.22~2025.05.16
LM500h: 2024.04.03~2025.08.08
LX700h: 2024.12.10~2025.07.28
LS500h: 2022.10.26~2025.08.27
LS500: 2022.10.17~2025.08.19
RZ450e: 2023.02.02~2023.09.04
LC500 CV: 2023.05.18~2024.05.28
LC500h: 2023.06.28~2024.05.13
MOLIT · South KoreaDec 18, 20255953Model years 2021–2025Auto-translated · original: KoreanView details →
In the panoramic view monitor, insufficient consideration in the control program can cause the vehicle's surrounding video to shift, or to temporarily stop or disappear, when an operation such as reversing is performed immediately after starting the vehicle. As a result, the vehicle may not comply with safety standards.
In the combination meter, insufficient consideration of the control program may cause elements on the circuit board to deteriorate early when the meter's operating time becomes long. As a result, the meter display may not appear when the meter starts up during engine start, and the speedometer, warning lights, and so on may not be visible.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).