The lower nut and bolt securing the shock absorber to the steering knuckle may become loose, leading to its detachment. This could result in loss of control of the vehicle or impaired steering stability, which could increase the risk of a crash.
EU Safety Gate · RappelConso · FranceDec 16, 2022a12/00509/22Model years 2013–2015Auto-translated · original: FrenchView details →
The corrosion of the tailgate strut can lead to its failure. This may cause the tailgate to open suddenly and pieces of luggage to fall onto the road, thereby increasing the risk of an accident.
EU Safety Gate · RappelConso · FranceDec 15, 2022a12/00510/22Model years 2013–2014Auto-translated · original: FrenchView details →
On the subject vehicles the control logic which monitors the charging control program fails to divert the electrical power away from the capacitor when a fault is detected within the capacitor circuit. This can cause a short circuit inside the DCDC converter and could cause the engine to stall or overheating of the DCDC converter itself which could cause a fire. The fault is accompanied by the �i-ELOOP� warning light being illuminated on the instrument cluster along with the �i-Stop� warning light flashing The engine may in some circumstances stall and fail to restart. In extreme cases the DCDC converter could overheat and cause a fire
DVSA · United KingdomSep 17, 2018R/2018/237Model years 2015–2017View details →
The engine control unit of the direct-current converter may be defective. This could result in a short circuit and damage of the converter, which can lead to a fire.
EU Safety GateSep 7, 2018A12/1310/18Model years 2014–2017View details →
Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.
NHTSA · United StatesApr 11, 201616V203000Model years 2016View details →
On certain vehicles, the nut and bolt holding the strut assembly to the knuckle may not have been tightened properly during the manufacturing process. Over time, this could cause the strut assembly to separate from the knuckle, resulting in a loss of steering control which would increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will inspect and replace the nut and bolt holding the strut assembly to the knuckle if found loose.
Transport CanadaApr 8, 20162016152Model years 2016View details →
In gasoline-engine vehicles, the impeller (resin impeller) of the low-pressure fuel pump may be deformed by swelling from the fuel because the resin density is low due to improper molding conditions. As a result, the impeller may contact the pump case, causing the low-pressure fuel pump to malfunction and, in the worst case, possibly leading to engine stalling while driving.
Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
NHTSA · United StatesJul 14, 202323V487000Model years 2016–2021View details →
The low-pressure fuel pump impeller can deform and cause a failure of fuel pumping. This can lead to the engine not starting and/or stalling, which increases the risk of an accident.
EU Safety Gate · RappelConso · FranceJan 28, 2022a12/00177/22Model years 2017–2020Auto-translated · original: FrenchView details →
In gasoline-engine vehicles, the impeller (resin impeller) of the low-pressure fuel pump may have a lower resin density due to improper molding conditions, and may swell and deform when exposed to fuel. As a result, the impeller may contact the pump case, causing the low-pressure fuel pump to malfunction and, in the worst case, potentially leading to engine stalling while driving.
Mazda North American Operations (Mazda) is recalling certain 2018 Mazda3, Mazda6, 2019 CX-3, 2018-2019 MX-5, CX-5, CX-9, and 2019-2020 Mazda2 vehicles. The impeller inside the low-pressure fuel pump may crack and deform, potentially causing the fuel pump to fail.
NHTSA · United StatesNov 12, 202121V875000Model years 2019View details →
On the subject vehicles the engine protection logic does not work properly. When the engine speed reaches maximum with no engine load present � the software is unable to cut the engine. This could in extreme cases cause catastrophic engine failure. Immediate and catastrophic engine damage may result.
DVSA · United KingdomApr 2, 2018R/2018/087Model years 2015–2017View details →
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
NHTSA · United StatesSep 6, 201616V644000Model years 2016View details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).