Brakes: problems reported by owners
146 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2013–2017), typically at around 29,000 miles. Reported consequences: 18 crashes, 1 fire, 5 injuries.
🔔 Create a free account to get email alerts about Mazda CX-5 (all generations)
Everything about the Mazda CX-5, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
146 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2013–2017), typically at around 29,000 miles. Reported consequences: 18 crashes, 1 fire, 5 injuries.
64 owners in the United States reported problems with the accelerator and cruise control of this car to NHTSA (model years 2012–2017), typically at around 20,000 miles. Reported consequences: 13 crashes, 4 injuries.
100 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2018–2025), typically at around 3,000 miles. Reported consequences: 27 crashes, 15 injuries.
75 owners in the United States reported problems with the automatic emergency braking of this car to NHTSA (model years 2018–2025), typically at around 114,000 miles. Most often named: automatic emergency braking (71%), warnings (39%), adaptive cruise control (20%). Reported consequences: 13 crashes, 8 injuries.
56 owners in the United States reported problems with the accelerator and cruise control of this car to NHTSA (model years 2018–2025), typically at around 7,000 miles. Reported consequences: 18 crashes, 8 injuries.
On the center display (10.25-inch type), the program that corrects the screen display is inappropriate. As a result, when switching the screen to TV or switching from TV to another screen such as navigation, the video signal may become distorted and cannot be corrected. Therefore, the distorted video signal may cause stripe patterns to appear on the screen, and the camera image may not be displayed.
In gasoline-engine vehicles, the impeller (resin impeller) of the low-pressure fuel pump may be deformed by swelling from the fuel because the resin density is low due to improper molding conditions. As a result, the impeller may contact the pump case, causing the low-pressure fuel pump to malfunction and, in the worst case, possibly leading to engine stalling while driving.
The corrosion of the tailgate strut can lead to its failure. This may cause the tailgate to open suddenly and pieces of luggage to fall onto the road, thereby increasing the risk of an accident.
Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.
Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.
Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazdas servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0).