Due to possible deformation of the fuel tank, the pipes may not be properly welded to the tank, and this weld may break. A fuel leak may occur, which increases the risk of fire.
EU Safety Gate · RappelConso · FranceDec 16, 2022a12/00292/22Model years 2015Auto-translated · original: FrenchView details →
Door een onjuiste aansturing van het hydraulische kleppentrein kan de inlaatklep, tijdens bepaalde bedrijfsomstandigheden, in contact komen met andere inwendige bewegende motoronderdelen.
rdwAug 8, 2019MGP190348Model years 2019–2022Shown in the original Dutch · translation pendingView details →
Het regelcircuit van de brandstofinjectie kan met een te hoge elektrische stroom worden belast. Dit kan leiden tot kortsluiting in het regelcircuit en uitvallen van de brandstofinjectie.
rdwNov 5, 2018MGP180528Model years 2013–2016Shown in the original Dutch · translation pendingView details →
De lasnaad van de brandstofinlaatregelklep aan de brandstoftank is mogelijk onjuist uitgevoerd. Hierdoor kan de lasnaad van de inlaatregelklep scheuren.
rdwJun 19, 2017MGP170314Model years 2015–2016Shown in the original Dutch · translation pendingView details →
null The plastic connector between the fuel tank and the vent hose nipple may break, causing fuel to leak which could lead to a fire. Fuel leaking on to the road may cause a hazard for following vehicles.
EU Safety GateMar 10, 2017A12/0323/17Model years 2015View details →
Mazda North American Operations (Mazda) is recalling certain model year 2016 Mazda3 vehicles manufactured September 24, 2015, to October 16, 2015. During manufacturing, the fuel tanks for the affected vehicles may have deformed, resulting in a fuel leak from the recirculation pipe welded connection.
NHTSA · United StatesSep 23, 201616V685000Model years 2016View details →
On certain vehicles. the fuel tank may contain a defect which could allow a weld to break, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect the fuel tank and replace if necessary.
Transport CanadaSep 22, 20162016465Model years 2016View details →
On certain vehicles. the fuel tank may contain a defect which could allow a weld to break, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect the fuel tank and replace if necessary.
Transport CanadaSep 22, 20162016464Model years 2014–2016View details →
Mazda Motors North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda3 vehicles manufactured January 4, 2014, to September 18, 2015. The fuel tank of the affected vehicles may have been improperly handled during manufacturing and, as a result, the welded attachment of the Inlet Check Valve (ICV) may fail and allow fuel to leak.
NHTSA · United StatesSep 22, 201616V684000Model years 2014–2016View details →
Mazda North American Operations (Mazda) is recalling certain model year 2015-2016 Mazda3 vehicles manufactured May 21, 2015, to August 25, 2015. The affected vehicles are equipped with a fuel tank with a shut-off valve that can allow fuel to enter into the fuel tank emissions systems. If enough fuel enters the emission system it may leak out onto the ground or result in an engine stall.
NHTSA · United StatesOct 2, 201515V621000Model years 2015–2016View details →
In gasoline-engine vehicles, the impeller (resin impeller) of the low-pressure fuel pump may be deformed by swelling from the fuel because the resin density is low due to improper molding conditions. As a result, the impeller may contact the pump case, causing the low-pressure fuel pump to malfunction and, in the worst case, possibly leading to engine stalling while driving.
A short circuit may occur in the injector control circuit, which could stall the engine and reduce brake assistance. These conditions could increase the risk of injury in the event of an accident.
EU Safety Gate · RappelConso · FranceFeb 18, 2022a12/00283/22Model years 2012–2016Auto-translated · original: FrenchView details →
In gasoline-engine vehicles, the impeller (resin impeller) of the low-pressure fuel pump may have a lower resin density due to improper molding conditions, and may swell and deform when exposed to fuel. As a result, the impeller may contact the pump case, causing the low-pressure fuel pump to malfunction and, in the worst case, potentially leading to engine stalling while driving.
Mazda North American Operations (Mazda) is recalling certain 2018 Mazda3, Mazda6, 2019 CX-3, 2018-2019 MX-5, CX-5, CX-9, and 2019-2020 Mazda2 vehicles. The impeller inside the low-pressure fuel pump may crack and deform, potentially causing the fuel pump to fail.
NHTSA · United StatesNov 12, 202121V875000Model years 2018View details →
Door onjuiste software van de motorregeleenheid bestaat de kans dat na de automatische herstart het motortoerental niet snel genoeg kan worden verhoogd en de motor afslaat.
rdwJan 24, 2020MGP200029Model years 2019–2022Shown in the original Dutch · translation pendingView details →
De electrische contacten van het ruitenwisserrelais, in de de Front Body Control Module, kunnen vast blijven zitten waardoor de ruitenwissermotor niet meer van stroom wordt voorzien.
rdwMay 23, 2019MGP190247Model years 2015–2019Shown in the original Dutch · translation pendingView details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).