On affected vehicles The brackets used to secure the fuel pipes to the engine may not be tightened sufficiently. If the engine is repeatedly operated at high speed such as during circuit driving vibrations may cause the fuel pipe to resonate potentially causing the pipe to leak. The fuel leakage may increase the risk of fire.
DVSA · United KingdomNov 3, 2025R/2025/442Model years 2015–2018View details →
The engine control unit of the direct-current converter may be defective. This could result in a short circuit and damage of the converter, which can lead to a fire.
EU Safety GateSep 7, 2018A12/1310/18Model years 2014–2017View details →
In gasoline-engine vehicles, the impeller (resin impeller) of the low-pressure fuel pump may be deformed by swelling from the fuel because the resin density is low due to improper molding conditions. As a result, the impeller may contact the pump case, causing the low-pressure fuel pump to malfunction and, in the worst case, possibly leading to engine stalling while driving.
The low-pressure fuel pump impeller can deform and cause a failure of fuel pumping. This can lead to the engine not starting and/or stalling, which increases the risk of an accident.
EU Safety Gate · RappelConso · FranceJan 28, 2022a12/00177/22Model years 2017–2020Auto-translated · original: FrenchView details →
Mazda North American Operations (Mazda) is recalling certain 2018 Mazda3, Mazda6, 2019 CX-3, 2018-2019 MX-5, CX-5, CX-9, and 2019-2020 Mazda2 vehicles. The impeller inside the low-pressure fuel pump may crack and deform, potentially causing the fuel pump to fail.
NHTSA · United StatesNov 12, 202121V875000Model years 2018–2019View details →
The floor mat fitted in the driver's footwell may interfere with the throttle pedal and cause the throttle to stick open. This may lead to loss of control of the vehicle.
DVSA · United KingdomDec 7, 2000R/2000/138View details →
On certain vehicles, the fuel filler non-return valve may stick causing "fuel spit back" when filling the fuel tank. Correction: Dealers will replace the non-return valve with a modified version.
Transport CanadaMar 8, 20002000060Model years 1999View details →
Vehicle description: Passenger vehicles. The non-return valve installed at the lower end of the fuel filler pipe can stick due to insufficient clearance between the valve case and the valve shutter combined with the material properties of the fuel hose between the filler pipe and the fuel tank.
NHTSA · United StatesFeb 7, 200000V032000Model years 1999View details →
On certain vehicles, the fuel injector harness may contact the manifold at the EGR pipe due to variations in the length and routing of the injector harness. If the harness is damaged a short circuit may occur, blowing the fuse for the fuel injector, resulting in engine stalling. Correction: Injector harness will be rerouted or replaced if damaged.
Transport CanadaApr 8, 19981998067Model years 1999View details →
These vehicles may not comply with c.M.V.S.S. 1103 - exhaust emissions. Catalyst may fail due to vibration. Correction: Catalytic converters will be replaced on affected vehicles.
Transport CanadaJul 13, 19921992083Model years 1990View details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).