On certain mini vans and passenger vehicles, the socket holder in the fog lights is installed in the lamp casing using pressure. During operation of the fog light, the heat from the bulb can expand the socket holder. The expansion can force the socket holder rearward. After repeatedly being subject to this expansion, if the fog light is also subjected to vibration during vehicle operation, the socket holder with the bulb holder and the wiring harness may separate from the fog light casing.
NHTSA · United StatesJun 5, 200303V206000Model years 2001–2003View details →
On certain vehicles, the front fog light bulb socket was installed improperly. If the vehicle continues to operate with this condition, the bulb socket and the wiring harness may separate from the fog light housing as a result of exposure to vehicle vibration. Should this occur, the bulb socket and the harness can drop inside the bumper and in the worst case, the heat generated can cause the bumper to burn. Correction: Dealer will re-install the bulb socket properly.
Transport CanadaFeb 25, 20032003047Model years 2001–2003View details →
Certain vehicles do not comply with Regulation 6 - Statement of Compliance. Vehicles have an incorrect National Safety Mark (NSM). Correction: Since this non-compliance does not present a risk to vehicle safety, no further action will be taken.
Transport CanadaAug 28, 20002000176Model years 1999–2000View details →
On certain vehicles, the fuel filler non-return valve may stick causing "fuel spit back" when filling the fuel tank. Correction: Dealers will replace the non-return valve with a modified version.
Transport CanadaMar 8, 20002000060Model years 1999View details →
Vehicle description: Passenger vehicles. The non-return valve installed at the lower end of the fuel filler pipe can stick due to insufficient clearance between the valve case and the valve shutter combined with the material properties of the fuel hose between the filler pipe and the fuel tank.
NHTSA · United StatesFeb 7, 200000V032000Model years 1999View details →
On certain vehicles, the fuel injector harness may contact the manifold at the EGR pipe due to variations in the length and routing of the injector harness. If the harness is damaged a short circuit may occur, blowing the fuse for the fuel injector, resulting in engine stalling. Correction: Injector harness will be rerouted or replaced if damaged.
Transport CanadaApr 8, 19981998067Model years 1999View details →
Vehicle description: Passenger vehicles equipped with 1.8 liter engines. As a result of the length and routing of the injector harness, it can contact the manifold at the egr pipe. If the harness is damaged, a short circuit can occur, blowing the fuse for the fuel injector.
NHTSA · United StatesMar 25, 199898V066000Model years 1999View details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).