Free to read · free account to contributeSuccessor to Anticars (2000)

Mazda RX-7

1985–2002 · 2 generations · 8 documented defects · 2 markets
Generations
Model year
MarketAllJPNA
RX-7 III · 1991–2002
RecallCriticalEngineNA

Fuel System

Residual engine heat after the engine is turned off may cause premature deterioration of fuel hose elasticity. This may lead to a reduction in the seating performance of the fuel hoses. In addition, removing and reinstalling the deteriorated fuel hoses may cause fuel seepage which could possibly result in an engine compartment fire. Correction: Fuel hoses will be replaced with modified hoses.

Transport CanadaApr 7, 19951995067Model years 1993–1995View details →
RX-7 III · 1991–2002
RX-7 III · 1991–2002
RecallCriticalEngineNA

Engine

The pressure at which the radiator cap pressure relief valve releases the build up of cooling system pressure is set too high. This can result in excessive coolant temperature and cooling system leaks. Leaking coolant mixture can collect on the top of the engine, where some of the water can evaporate, increasing the concentration of the coolant. If the coolant then leaks onto the exhaust manifold, an engine fire can result. Correction: Vehicles will be inspected and the radiator cap and the filler cap body will be replaced. Vehicles exhibiting leakage sufficient to trigger the coolant level warning system will have the following components replaced: Water pump bearing housing, water level sensor and upper radiator hose, thermostat gasket, and all water hoses located above the engine.

Transport CanadaMay 19, 19941994092Model years 1993–1994View details →
RX-7 III · 1991–2002
RecallCriticalEngineNA

Engine and engine cooling:Cooling system

The radiator cap pressure relief valve release pressure is set too high. This can cause the coolant to reach temperatures that exceed the thermal design limits of some components of the coolant system. Should this occur, engine coolant can leak collect on top of the engine.

NHTSA · United StatesMay 11, 199494V094000Model years 1993–1994View details →
RX-7 II · 1985–1991RX-7 III · 1991–2002
RecallModerateBodyJP

Body

Some air spoilers sold as dealer-optional parts have an improper shape, so the air spoiler becomes the rearmost part of the vehicle. These spoilers do not meet the safety standards that apply to air spoilers.

MLIT · JapanNov 27, 20031110110Model years 1991–2002Auto-translated · original: JapaneseView details →
RX-7 II · 1985–1991RX-7 III · 1991–2002
RecallModerateBodyJP

Car body

The resin hood (Mazdaspeed aero bonnet) sold as an aftermarket accessory has an improperly designed striker in its hood lock mechanism. If it continues to be used in this condition, the welded portion of the striker may break, and in the worst case the hood could open while driving and damage the windshield.

MLIT · JapanNov 21, 20001106910Model years 1991–2000Auto-translated · original: JapaneseView details →
RX-7 II · 1985–1991RX-7 III · 1991–2002
RecallModerateInteriorNA

Seat belts:Front:Webbing

The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

NHTSA · United StatesSep 16, 199696V173000Model years 1989–1991View details →
RX-7 III · 1991–2002
RecallModerateBrakesNA

Brakes

Oil mist contained in the engine intake air may collect over time in the brake vacuum check valve, preventing the check valve from opening at the specified pressure. This could result in diminished brake performance on the first to third attempts after the vehicle is left parked overnight, and restarted in the morning. Correction: The two vacuum hoses will be replaced on affected vehicles.

Transport CanadaAug 6, 19961996123Model years 1993–1995View details →
RX-7 III · 1991–2002
RX-7 II · 1985–1991
RecallModerateEngineNA

Emissions

These vehicles do not comply with c.M.V.S.S. 1105 - evaporative emissions. Wrong routing of purge hose.

Transport CanadaOct 26, 19871987115Model years 1986View details →
RX-7 II · 1985–1991
RecallModerateBrakesNA

Brakes

Road salt may accumulate at the surfaces of the components of the front brake calipers, resulting in pad liner corrosion. This could prevent free movement of the disc pads and result in ineffective front braking. Consequent increased stopping distances could result in a vehicle crash. Correction: Front brake calipers will be inspected and if necessary, replaced.

Transport CanadaOct 19, 19871987111Model years 1986–1987View details →
RX-7 II · 1985–1991

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).