Electrical system: problems reported by owners
27 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2019–2022), typically at around 10,000 miles. Reported consequences: 1 crash, 1 fire.
🔔 Create a free account to get email alerts about Mercedes-Benz A-Class (all generations)
Everything about the Mercedes-Benz A-Class, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
27 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2019–2022), typically at around 10,000 miles. Reported consequences: 1 crash, 1 fire.
22 owners in the United States reported problems with the engine of this car to NHTSA (model years 2019–2022), typically at around 25,000 miles. Reported consequences: 1 fire.
12 owners in the United States reported problems with the fuel system of this car to NHTSA (model years 2019–2022), typically at around 59,000 miles. Reported consequences: 1 fire.
Bij 4,6% van de APK-keuringen van deze auto in Nederland werd dit gebrek vastgesteld (188 van 4.094 keuringen in de afgelopen 12 maanden): 3,5 keer zo vaak als bij auto's van dezelfde leeftijd.
Bij 7,7% van de APK-keuringen van deze auto in Nederland werd dit gebrek vastgesteld (316 van 4.094 keuringen in de afgelopen 12 maanden): 2,1 keer zo vaak als bij auto's van dezelfde leeftijd.
De rechter achterwielophanging kan bij uitzonderlijk gebruik breken.
공급업체의 개발 공정 편차로 인해 특정 기후 조건에서 마이크로 스위치의 밀봉재가 수분 흡수에 취약해질 수 있으며, 이런 경우 시간이 지나면서 수분이 흡수되고 마이크로 스위치에 부식이 발생하면서 도어가 열린 상태를 차량이 감지하지 못할 수 있음. 다만, 도어 잠금장치 자체의 작동에는 영향을 주지 않음. 운전석 도어의 마이크로 스위치가 고장나면, 운전석 도어 열림에 연결된 주차 브레이크 또는 짜동 P단 기능이 작동하지 않을 수 있고, 이로 인해 차량이 굴러가는 것을 방지하지 못하여 충돌 위험이 증가할 수 있음이 확인됨에 따른 리콜
The gasket between the exhaust manifold and the exhaust gas turbocharger is missing. This can allow hot, untreated exhaust gases to leak between the turbocharger and the manifold. It can damage the cylinder head cover and cause an oil leak. If the oil comes into contact with hot engine parts, the vehicle may catch fire.
Complaint While driving, engine speed may increase with accelerator pedal input while vehicle acceleration remains limited with no torque transfer to the wheels 4th gear may remain displayed in the instrument cluster after the condition occurs, including when the vehicle has come to a standstill. Cycling the ignition may restore normal transmission operation. No related fault code or warning message may be stored. Cause During extended periods of steady driving in 4th gear, a preventative flushing routine of the Mux2P valve may be performed in the transmission valve body. If 3rd gear is requested shortly afterward, the pressure within the Mux2P oil channel may not yet have fully reduced. Under these conditions, the transmission control unit may detect an implausible shift actuator movement. As a protective measure, the transmission control unit may temporarily shift the transmission into neutral. As a result, 4th gear may continue to be displayed in the instrument cluster even after the vehicle has come to a standstill. Remedy Please perform the following: 1. Update software TCM8FDCT_PT4 transmission control unit
Complaint Clanking noise from the area of the speakers in the doors. Cause Under analysis. Remedy To narrow down the cause, first of all remove the door trim. If the noise continues to occur even with the door trim removed, then continue the diagnosis working towards the speaker and if necessary, create a TIPS case with an informative video as an attachment. Note: Please refer to this document in the warranty claim and, once diagnosis is completed, select the damage code depending on the component part that is causing the issue. If the noise stops when the door trim is removed, please proceed in accordance with LI72.10P067691. Information: In this case, do not use a damage code for the speakers in the warranty claim!
Complaint Slight creaking noises when steering. Cause Noises may come from one or more sleeves of the horn contact plate. Remedy Remove the horn contact plate and check the sleeves for noise; see attached video. If necessary, apply lubricant to the sleeves.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).