Motorrijtuigen en aanhangwagens - algemene bouwwijze
Het frontend is mogelijk niet goed vastgeschroefd.
🔔 Create a free account to get email alerts about Mini Countryman (all generations)
Het frontend is mogelijk niet goed vastgeschroefd.
De HV accucellen hebben mogelijk een productiefout.
De las verbinding van de HV accucellen is mogelijk niet juist gelast.
On certain vehicles, a crankshaft sensor error may cause the engine to stall. This would result in a loss of motive power, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the crankshaft sensor. Note: This condition would result in the illumination of the check engine warning lamp and an “engine malfunction” message appearing in the instrument cluster. Note: This is an expansion of recall 2018-373.
The high-pressure fuel pump may not be fitted with a protective plate. As a result, the high-pressure pump may be damaged during a collision.
BMW of North America, LLC (BMW) is recalling certain 2017-2019 MINI Cooper Countryman vehicles. These vehicles may be missing a crash protection plate near the high pressure fuel pump, which may result in a fuel leak in the event of a crash.
The front end may not be properly bolted to the engine subframe. If one of the bolts has not been correctly tightened and comes loose, the vehicle's safety may be compromised in the event of a frontal collision. In this case, there may be an increased risk of injury. In addition, a loose bolt may pose an accident risk to following traffic.
The hollow shaft of the brake booster was poorly welded. The weld may not be able to withstand the buildup of high brake pressure and may break. In this case, reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident.
For certain vehicles BMW Group has developed a package of measures (hardware and software) for the emission control system of the MINI R60/R61.
BMW of North America, LLC (BMW) is recalling certain 2018 BMW 540d xDrive vehicles. The crankshaft sensor may be equipped with incorrect firmware, preventing the sensor from properly processing input from the crankshaft reluctor ring, possibly resulting in a vehicle stall. On September 12, 2018, BMW expanded the recall to a total of 5,309 vehicles including certain 2018-2019 BMW 540d xDrive, 230i M240i, M240i xDrive, X2 sDrive28i, X2 xDrive28i, X1 sDrive28i, X1 xDrive28i, 330i, 330i xDrive, 340i, 340i xDrive, 330i xDrive Gran Turismo, 530i, 530i xDrive, 540i, 540i xDrive, 530e, 530e xDrive, 640i xDrive Gran Turismo, 330e, 2019 430i Gran Coupe, 430i xDrive Gran Coupe, 440i Gran Coupe, 440i xDrive Gran Coupe, 430i, 430i xDrive, 440i, 440i xDrive, 740i, 740i xDrive, MINI Cooper, Cooper S, JCW, MINI Countryman (Cooper, Cooper All4, Cooper S, Cooper S All4, JCW All4), and MINI Clubman (Cooper, Cooper S, Cooper All4, Cooper S All4, JCW All4) vehicles.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).