Activation of a non-dessicated ammonium nitrate inflator with degraded propellant may result in an inflator rupture
Activation of a non-desiccated ammonium nitrate inflator with degraded propellant may result in an inflator rupture.
🔔 Create a free account to get email alerts about Mitsubishi Lancer Evolution Evolution Wagon
Activation of a non-desiccated ammonium nitrate inflator with degraded propellant may result in an inflator rupture.
When the front passenger airbag is deployed, a part of the inflation mechanism can come loose due to the high pressure.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2006-2007 Lancer and Lancer Evolution vehicles manufactured June 29, 2005, to June 19, 2007, equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating air bag deployment, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
On certain passenger vehicles, the turbo charger coolant hose was incorrectly manufactured, and may allow coolant leakage.
In vehicles equipped with a sunroof, the resin material used for the outer frame of the sunroof glass may be improperly selected, so the adhesive strength between the frame and the sunroof glass can decline due to changes in temperature and humidity. If use continues in this condition, the sunroof glass may peel away from the outer frame and, in the worst case, may come loose from the vehicle due to vibration or wind pressure while driving.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2002-2007 Lancer, 2004 Lancer Wagon, 2003-2006 Lancer Evolution, 2003-2006 Outlander and 2007-2013 Outlander V-6 vehicles originally sold in, or ever registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, the front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.
Some turn/light switches have insufficient mounting rigidity, so switch operation wears the connector terminals. The wear debris then oxidizes and forms an insulating material. If use continues, this insulating material can become lodged between the terminals and cause a conduction failure. This may cause the headlamps, clearance lamps, front fog lamps, rear fog lamps, tail lamps, license plate lamps, and the interior lighting linked to the switch to go out or flicker, or cause the turn signals to go out.
Bij het activeren van de voorste passagiersairbag kan, als gevolg van de hoge druk, een deel van het opblaasmechanisme losraken.
null Due to defects in their construction, the light control switch and/or turn indicator switch might malfunction. The defect in the light control switch may also result in sudden failure of the dipped headlights when the car is being driven.
エンジンの補機駆動用ベルトの材質が不適切なため、樹脂製プーリが傾斜状に摩耗するものがある。そのため、そのまま使用を続けると当該ベルトが損傷して外れ、警告灯が点灯するとともに、バッテリ上がりまたはオーバーヒートに至るおそれがある。また、油圧パワーステアリング車においては、操舵力が増大するおそれがある。
Due to a fault in the soldering process of the lighting switch circuit board it is possible that the solder on the lighting circuit switch can crack as a result of temperature changes during production. This can result in the lights or turn signals failing totally or blinking/flicker.
高輝度放電式(HID)前照灯の自動式照射方向調節装置(レベラー)において、電気回路が不適切なため、使用過程で回路接点に接触抵抗が発生した場合に、自動式照射方向調節装置(レベラー)が正常に作動しないおそれがある。
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).